Items where Division is "Mechanical and Industrial Engineering Department" and Year is 2023

Group by: Creators | Item Type | No Grouping

Jump to: Article | Conference or Workshop Item

Number of items: 81.

Article

Ahmad, Noesanto Dewantoro and Kusmono, Kusmono and Wildan, Muhammad Waziz and Herianto, Herianto (2023) Preparation and properties of cellulose nanocrystals-reinforced Poly (lactic acid) composite filaments for 3D printing applications. Results in Engineering, 17. ISSN 25901230

Anagra, Ignatius and Bahiuddin, Irfan and Priatomo, Herjuno Rizki and Winarno, Agustinus and Darmo, Suryo and Sandhy, Rienetta Ichmawati Delia and Mazlan, Saiful Amri (2023) Detection of coal wagon load distributions based on geometrical features using extreme learning machine methods. International Journal of Information Technology (Singapore), 16 (2). pp. 939-947. ISSN 25112112

Andoko, Andoko and Gapsari, Femiana and Prasetya, Riduwan and Sulaiman, Abdul Mudjib and Rangappa, Sanjay Mavinkere and Siengchin, Suchart (2023) Walikukun fiber as lightweight polymer reinforcement: physical, chemical, mechanical, thermal, and morphological properties. BIOMASS CONVERSION AND BIOREFINERY. pp. 1-13. ISSN 2190-6815

Ardiyanto, Ardiyanto and Saraswati, Luthfia Aurensa and Rahmatika, Fanny and Afandi, Ardian Rahman and Trapsilawati, Fitri (2023) Comprehension of international safety signs: A prospective technical workers context. INTERNATIONAL JOURNAL OF INDUSTRIAL ERGONOMICS, 98. ISSN 0169-8141

Ariani, Farida and Suratman, Adhitasari and Siswanta, Dwi (2023) Synthesis of Dialdehyde Carboxymethyl Cellulose-Crosslinked-Chitosan for Preconcentration of Cu(II) Using Batch Method. Key Engineering Materials, 949. pp. 57-65. ISSN 16629795

Arifvianto, Budi and Santoso, Wahyu and Rajagukguk, Kardo and Hayyaulia, Pratyas Sarah and Salim, Urip Agus and Mahardika, Muslim and Suyitno, Suyitno (2023) Recycling of Magnesium Alloy Scrap by Remelting and Chemical De-coating Process. Metallurgical and Materials Engineering, 29 (4). pp. 33-42.

Aryaswara, Lugas Gada and Sentanuhady, Jayan and Hajad, Makbul and Muflikhun, Muhammad Akhsin (2023) Scientometric Analysis and Systematic Study of Nanomaterial Synthesized via CVD, Sol-Gel, and VPG Methods: A Big Data Clustering Perspective. Journal of Engineering Science and Technology Review, 16 (1). pp. 1-9. ISSN 17912377

Astyanto, Achilleus Hermawan and Nugroho, Akhlisa Nadiantya Aji and Indarto, Indarto and Gusti Ngurah Bagus Catrawedarma, I. and Lucas, Dirk and Deendarlianto, Deendarlianto (2023) Statistical characterization of the interfacial behavior captured by a novel image processing algorithm during the gas/liquid counter-current two-phase flow in a 1/3 scaled down of PWR hot leg. Nuclear Engineering and Design, 404: 112179. pp. 1-18. ISSN 00295493

Effendi, M. Khoirul and Soepangkat, Bobby O. P. and Harnany, Dinny and Norcahyo, Rachmadi (2023) Multi-performance Optimization in End Milling of GFRP Composites Using Backpropagation Neural Network and Differential Evolution Algorithm. Lecture Notes in Mechanical Engineering. pp. 325-333. ISSN 21954364

Fauzun, Fauzun and Yogiswara, Cahyo Wibi and Ariyadi, Hifni Mukhtar and Taufiqurrahman, Muhammad Salim and Ritonga, Aldy Franstanata and Pranoto, Indro and Garingging, Rendianto Aginta and Areli, Fakhreza and Putra, Rahma Kurnia and Al-Qadri, Maulana Hafizh and Fatkhi, Afrizal Soffan and Nurdiansyah, Rahardian Titus and Restu, Firdausa Retnaning (2023) Numerical Study The Effect of Air Barriers Height Inside The Air Conditioning Ducting to Satisfy The Regulation of Indonesia Minister of Transportation Number 69 of 2019. Journal of Applied Engineering Science, 21 (4). pp. 1156-1170.

Harnany, Dinny and Effendi, M. Khoirul and Kis Agustin, H. C. and Soepangkat, Bobby O.P. and Sampurno, Sampurno and Norcahyo, Rachmadi (2023) Multi-objective Optimization Using Backpropagation Neural Network and Teaching–Learning-Based-Optimization Method in Surface Grinding Under Dry and Minimum Quantity Lubrication Conditions (MQL). Lecture Notes in Mechanical Engineering. pp. 334-342. ISSN 21954364

Harwati, Harwati and Sri Asih, Anna Maria and Sopha, Bertha Maya (2023) Analysis and Prioritizing Capability in the Halal Resilience Supply Chain: A Fuzzy AHP Approach. International Journal of Industrial Engineering and Production Research, 34 (3). pp. 1-18. ISSN 2345363X

Herianto, Herianto and Mastrisiswadi, Hasan and Nasution, Andri and Atsani, Sarah Iftin (2023) Effect of Shot Peening Parameters on PLA Parts Manufactured with Fused Deposition Modeling. JOURNAL OF ENGINEERING AND TECHNOLOGICAL SCIENCES, 55 (5). pp. 513-523. ISSN 2337-5779

Isharyani, Muriani Emelda and Sopha, Bertha Maya and Tjahjono, Benny and Wibisono, M. Arif (2023) Exploring the Smart Retail Scenario for Traditional Retailers: Case Studies From a Developing Country. IEEE Transactions on Engineering Management. pp. 1-17. ISSN 15580040

Jamasri, Jamasri and Yudhanto, Ferriawan and Yudha, Venditias and Syafri, Edi (2023) Mechanical, Physical and Thermal Characterization of PVA (Polyvinyl Alcohol)/Chitosan Bioplastic Film. International Journal of Heat and Technology, 41 (3). pp. 687-693. ISSN 03928764

Karuana, Feri and Prismantoko, Adi and Suhendra, Nandang and Darmawan, Arif and Hariana, Hariana and Darmadi, Djarot B. and Muflikhun, Muhammad Akhsin (2023) Investigation of austenitic stainless steel corrosion resistance against ash deposits from co-combustion coal and biomass waste. Engineering Failure Analysis, 150. ISSN 13506307

Kuo, R. J. and Luthfiansyah, Muhammad Fernanda and Masruroh, Nur Aini and Zulvia, Ferani Eva (2023) Application of improved multi-objective particle swarm optimization algorithm to solve disruption for the two-stage vehicle routing problem with time windows. Expert Systems with Applications, 225. ISSN 09574174

Kuo, R. J. and Luthfiansyah, Muhammad Fernanda and Masruroh, Nur Aini and Zulvia, Ferani Eva (2023) Application of improved multi-objective particle swarm optimization algorithm to solve disruption for the two-stage vehicle routing problem with time windows. EXPERT SYSTEMS WITH APPLICATIONS, 225. pp. 1-13. ISSN 0957-4174

Kusumaningsih, Haslinda and Deendarlianto, Deendarlianto and Indarto, Indarto and Alfath, Muhammad Fakhri and Madani, M. Rian Alif and Ritonga, Aldy Franstanata (2023) Fourier and Wavelet Analysis of Pressure Fluctuations in Gas-Non-Newtonian Liquid Two-Phase Flows in a Microchannel. Multiphase Science and Technology, 35 (3). pp. 67-80. ISSN 0276-1459

Ma'a, Mustaza and Pranoto, Indro and Kamal, Samsul (2023) Enhanced Heat Transfer Mechanisms in a Horizontal Annular Heat Exchanger Utilizing a Central Tubular Heater. International Journal of Heat and Technology, 41 (5). pp. 1327-1334.

Mara, Setyo Tri Windras and Rifai, Achmad Pratama and Norcahyo, Rachmadi (2023) On Different Formulations for the Multiperiod Vehicle Routing Problem With Simultaneous Pickup and Delivery. ASEAN Engineering Journal, 13 (1). pp. 27-39. ISSN 25869159

Mara, Setyo Tri Windras and Sutoyo, Edi and Norcahyo, Rachmadi and Rifai, Achmad Pratama (2023) The job sequencing and tool switching problem with sequence-dependent set-up time. Journal of King Saud University - Engineering Sciences, 35 (1). pp. 53-61. ISSN 10183639

Mawarni, Drajat Indah and Ristiyanto, Hartono Guntur and Deendarlianto, Deendarlianto and Budhijanto, Wiratni and Salem, Mai and Niyas, Hakeem and Indarto, Indarto (2023) Review on swirl-type microbubble generator: Concept, technology, and applications. Mechanical Engineering for Society and Industry, 3 (3 Spec). pp. 191-205.

Minaminosono, Ayato and Ohsugi, Yonusuke and Yamaguchi, Yuya and Wiranata, Ardi and Sawada, Hikaru and Hosoya, Naoki and Maeda, Shingo (2023) Pre-Strain Method for Stretchable Strain Sensors With Linear Sensitivity Using Acrylic Elastomer and CNTs Powder. IEEE Access, 11. pp. 125790-125799.

Minaminosono, Ayato and Ohsugi, Yunosuke and Yamaguchi, Yuya and Wiranata, Ardi and Sawada, Hikaru and Hosoya, Naoki and Maeda, Shingo (2023) Pre-Strain Method for Stretchable Strain Sensors With Linear Sensitivity Using Acrylic Elastomer and CNTs Powder. IEEE ACCESS, 11. pp. 1-11. ISSN 2169-3536

Muflikhun, Muhammad Akhsin and Adyudya, Mayradaffa and Rahman, Nur Fatah and Sentanuhady, Jayan and Raghu, Swathi Naidu Vakamulla (2023) Comprehensive analysis and economic study of railway brake failure from metal-based and composites-based materials. Forces in Mechanics, 12: 100223. pp. 1-13. ISSN 26663597

Muflikhun, Muhammad Akhsin and Yokozeki, Tomohiro (2023) Systematic analysis of fractured specimens of composite laminates: Different perspectives between tensile, flexural, Mode I, and Mode II test. International Journal of Lightweight Materials and Manufacture, 6 (3). pp. 329-343. ISSN 25888404

Muhayat, Nurul and Putri, Ericha Dwi Wahyu Syah and Hendrato, Hendrato and Depari, Yohanes Pringeten Dilianto Sembiring and Puspitasari, Poppy and Jamasri, Jamasri and Prabowo, Aditya Rio and Triyono, Triyono (2023) Apparatus Design of One-Step Double-Side Friction Stir Welding for Aluminum Plates. Designs, 7 (3). pp. 1-19. ISSN 24119660

Murti, Prastowo and Shoji, Eita and Biwa, Tetsushi (2023) Analysis of multi-cylinder type liquid piston Stirling cooler. Applied Thermal Engineering, 219: 119403. pp. 1-10. ISSN 13594311

Musyarofah, Siti Afiani and Tontowi, Alva Edy and Masruroh, Nur Aini and Wibowo, Budhi Sholeh and Warmadewanthi, I. Dewa Ayu Agung and Nasution, Arman Hakim and Bhawika, Gita Widi and Handiwibowo, Gogor Arif and Rusydi, Mohamad Khoiru (2023) Developing a Circular Economy Index to Measure the Macro Level of Circular Economy Implementation in Indonesia. Management Systems in Production Engineering, 31 (2). pp. 208-215. ISSN 24505781

Musyarofah, Siti Afiani and Tontowi, Alva Edy and Masruroh, Nur Aini and Wibowo, Budhi Sholeh and Warmadewanthi, I. Dewa Ayu Agung and Nasution, Arman Hakim and Bhawika, Gita Widi and Handiwibowo, Gogor Arif and Rusydi, Mohamad Khoiru (2023) Developing a Circular Economy Index to Measure the Macro Level of Circular Economy Implementation in Indonesia. MANAGEMENT SYSTEMS IN PRODUCTION ENGINEERING, 31 (2). pp. 208-215. ISSN 2299-0461

Nugraha, Ariyana Dwiputra and Fajrin, Muhamad Kevin and Malik, Zeeshan Hamid and Sentanuhady, Jayan and Kusni, Muhammad and Darmanto, Seno and Sutanto, Benny and Nugroho, Gesang and Muflikhun, Muhammad Akhsin (2023) Tilt Angle Optimization of Steam Turbine Blade Model Based on Aluminium: The Multi-Simulation Perspective. Journal of Engineering Science and Technology Review, 16 (4). pp. 188-195. ISSN 17912377

Nugraha, Ariyana Dwiputra and Harianto, Harianto and Muflikhun, Muhammad Akhsin (2023) Failure in power plant system related to mitigations and economic analysis; A study case from steam power plant in Suralaya, Indonesia. Results in Engineering, 17: 101004. pp. 1-11. ISSN 25901230

Nugraha, Ariyana Dwiputra and Harianto, Harianto and Muflikhun, Muhammad Akhsin (2023) Failure in power plant system related to mitigations and economic analysis; A study case from steam power plant in Suralaya, Indonesia. RESULTS IN ENGINEERING, 17. pp. 1-11. ISSN 2590-1230

Nugroho, Alvin Dio and Alandro, Daffa and Herianto, Herianto and Jamasri, Jamasri and Thirumalai, Sundararajan and Nugraha, Ariyana Dwiputra and Kusumawanto, Arif and Prawara, Budi and Muflikhun, Muhammad Akhsin (2023) Excellent Hybrid Polyurethane-Graphite Filler Micro Powder as a Lightweight Structure. Journal of Composites Science, 7 (10). pp. 1-23. ISSN 2504477X

Nurbaiti, N. and Tontowi, A. E. and Widyastuti, M. G. and Hoten, H. V. and Ibrahim, F. and Muna, N. and Febrian, R. and Perkasa, D. P. and Herliansyah, M. K. (2023) Process Parameter Optimization of 3D-Printer Machine Using Response Surface Method for Printing Hydroxyapatite/Collagen Composite Slurry. International Journal of Engineering Transactions C: Aspects, 36 (11). pp. 1961-1971. ISSN 24237167

Pamuji, Feby Agung and Dhiaulhaq, Muhammad Zufar and Wibowo, Rony Seto and Faurahmansyah, Mohamad Angga and Suwito, Suwito and Iskandar, Eka and Effendi, Mohammad Khoirul and Sudarmanta, Bambang and Syafi’i, Brilliant Alfan and Arumsari, Nurvita and Fauzun, Fauzun (2023) Energy Management System Design for Hybrid and Intelligent Light Train. Przegl\cd Elektrotechniczny, 1 (8). pp. 82-88. ISSN 0033-2097

Pranoto, Indro and Rahman, Muhammad Aulia and Wicaksana, Cahya Dhika and Wibisono, Alan Eksi and Fauzun, Fauzun and Widyatama, Arif (2023) Flow Boiling Heat Transfer Performance and Boiling Phenomena on Various Straight Fin Configurations. Fluids, 8 (3). pp. 1-14. ISSN 23115521

Prihandana, Gunawan Setia and Maulana, Sayed Sulthan and Soedirdjo, Rahmat Santoso and Tanujaya, Venni and Pramesti, Desak Made Adya and Sriani, Tutik and Jamaludin, Mohd Fadzil and Yusof, Farazila and Mahardika, Muslim (2023) Preparation and Characterization of Polyethersulfone/Activated Carbon Composite Membranes for Water Filtration. MEMBRANES, 13 (12). pp. 1-16.

Pujiyulianto, E. and Suyitno, Suyitno and Rajagukguk, K. and Arifvianto, B. and Katgerman, L. and Paundra, F. and Yudistira, H. T. and Nurullah, F. P. and Muhyi, A. and Arif, M. F. (2023) Effect of chemical composition on hot cracking susceptibility (HCS) using various hot cracking criteria. Engineering Failure Analysis, 152: 107501. pp. 1-13. ISSN 13506307

Rasid, Md Mamunur and Kimura, Masato and Murshed, Md Masum and Wijayanti, Erny Rahayu and Notsu, Hirofumi (2023) A Two-Step Lagrange–Galerkin Scheme for the Shallow Water Equations with a Transmission Boundary Condition and Its Application to the Bay of Bengal Region—Part I: Flat Bottom Topography. Mathematics, 11 (7). pp. 1-25. ISSN 22277390

Rifai, Achmad Pratama and Mulyani, Yun Prihantina and Febrianto, Rian and Arini, Hilya Mudrika and Wijayanto, Titis and Lathifah, Nurul and Liu, Xiao and Li, Jianxin and Yin, Hui and Wu, Yutao and Mohawesh, Rami (2023) Detection Model for Fake News on Covid-19 in Indonesia. ASEAN Engineering Journal, 13 (4). pp. 119-126.

Rifai, Achmad Pratama and Sutoyo, Edi and Mara, Setyo Tri Windras and Dawal, Siti Zawiah Md (2023) Multiobjective Sequence-Dependent Job Sequencing and Tool Switching Problem. IEEE Systems Journal, 17 (1). pp. 1-12. ISSN 19379234

Rochardjo, Heru Santoso Budi and Budiyantoro, Cahyo and Utomo, Rohadi Satrio Budi and Yudhanto, Ferriawan (2023) Manufacturing and Analysis of Mechanical Properties of Overmolded Hybrid Carbon Fiber Reinforced Polypropylene - Glass Fiber Reinforced Polyamide 6. International Review of Mechanical Engineering (IREME), 17 (5). p. 226. ISSN 1970-8734

S, Shiva and G, Asuwin Prabu R. and Bajaj, Gauri and John, Amy Elsa and Chandran, Sharan and Kumar, Vishnu Vijay and Ramakrishna, Seeram (2023) A review on the recent applications of synthetic biopolymers in 3D printing for biomedical applications. Journal of Materials Science: Materials in Medicine, 34 (12).

Sakti, Sekar and Zhang, Lele and Thompson, Russell G. (2023) Synchronization in synchromodality. Transportation Research Part E: Logistics and Transportation Review, 179. ISSN 13665545

Sakti, Sekar and Zhang, Lele and Thompson, Russell G. (2023) Synchronization in synchromodality. TRANSPORTATION RESEARCH PART E-LOGISTICS AND TRANSPORTATION REVIEW, 179. ISSN 1366-5545

Sakti, Sekar and Zhang, Lele and Thompson, Russell G. (2023) Synchronization in synchromodality. TRANSPORTATION RESEARCH PART E-LOGISTICS AND TRANSPORTATION REVIEW, 179: 103321. pp. 1-27. ISSN 1366-5545

Sari, Diana Puspita and Masruroh, Nur Aini and Asih, Anna Maria Sri (2023) Eco-Efficiency Comparative Analysis of Informal and Formal Smartphone Recycling Practices Using Life Cycle Assessment. International Journal on Advanced Science, Engineering and Information Technology, 13 (3). pp. 1108-1117. ISSN 24606952

Sari, Marti Widya and Herianto, Herianto and Dharma, Igb G.B.B. and Tontowi, Alva Edy (2023) Social Manufacturing on Integrated Production System: A Systematic Literature Review. Management Systems in Production Engineering, 31 (1). pp. 18-26. ISSN 24505781

Sasmito, Agus and Ilman, Mochammad Noer and Iswanto, Priyo Tri (2023) Effects of rotational speed on the mechanical properties and performance of AA6061-T6 aluminium alloy in similar rotary friction welding. Welding International, 37 (9). pp. 519-530. ISSN 17542138

Sentanu, Divlan Audie and Muflikhun, Muhammad Akhsin (2023) Characteristics of triangle in triangulated cylindrical origami with axial load test for space deployable structures. Journal of Mechanical Science and Technology, 37 (11). pp. 5957-5964.

Sentanuhady, Jayan and Robby, Muhamad Inda and Santoso, Santoso and Rahman, Nur Fatah and Muflikhun, Muhammad Akhsin (2023) Degradation of Quality and Contaminants in Lubricants of Diesel Engine Fueled By B100 of Train Power Generator in Long-Term Operation. International Journal of Energy for a Clean Environment, 24 (5). pp. 1-9. ISSN 2150363X

Setiawan, Joni and Sudiarso, Andi and Winursito, Isananto and Herliansyah, Muhammad Kusumawan (2023) Selection of Material and Manufacturing Technology for Batik Canting Stamps Based on Multi-Criteria Decision-Making Methods. Journal of Engineering and Technological Sciences, 55 (4). pp. 434-452.

Setiawan, Joni and Sudiarso, Andi and Winursito, Isananto and Herliansyah, Muhammad Kusumawan (2023) Selection of Material and Manufacturing Technology for<i> Batik</i><i> Canting</i> Stamps Based on Multi-Criteria Decision-Making Methods. JOURNAL OF ENGINEERING AND TECHNOLOGICAL SCIENCES, 55 (3). pp. 434-452. ISSN 2337-5779

Shiva, S. and Prabu, G. R. Asuwin and Bajaj, Gauri and John, Amy Elsa and Chandran, Sharan and Kumar, Vishnu Vijay and Ramakrishna, Seeram (2023) A review on the recent applications of synthetic biopolymers in 3D printing for biomedical applications. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE, 34 (12). pp. 1-22. ISSN 0957-4530

Sudarisman, Sudarisman and Haniel, Haniel and Taufik, Angger Kaloka and Tiopan, Muhammad and Himarosa, Rela Adi and Muflikhun, Muhammad Akhsin (2023) Tensile, Compressive, and Flexural Characterization of CFRP Laminates Related to Water Absorption. Journal of Composites Science, 7 (5). pp. 1-15. ISSN 2504477X

Sukmawan, Romi and Kusmono, Kusmono and Wildan, Muhammad Waziz (2023) Easy production of acetylated cellulose nanofibers from sisal fibers by conventional high-speed blender. BIOMASS CONVERSION AND BIOREFINERY, 14. pp. 23935-23946. ISSN 2190-6815

Sunarso, R V P and Wibowo, B S (2023) The Impact of Consolidating On-Demand Food Delivery on Sustainability: A Simulation Study. LOGI - Scientific Journal on Transport and Logistics, 14 (1). pp. 286-297. ISSN https://sciendo.com/article/10.2478/logi-2023-0026

Tiwan, Tiwan and Ilman, M. N. and Kusmono, Kusmono and Sehono, Sehono (2023) Microstructure and mechanical performance of dissimilar friction stir spot welded AA2024-O/AA6061-T6 sheets: Effects of tool rotation speed and pin geometry. International Journal of Lightweight Materials and Manufacture, 6 (1). pp. 1-14. ISSN 25888404

Trapsilawati, Fitri and Li, Fan and Yisi, Liu (2023) Ergonomics Considerations in Air Traffic Conflict Detection and Resolution. International Journal of Technology, 14 (4). pp. 1-13. ISSN 20872100

Trapsilawati, Fitri and Li, Fan and Yisi, Liu (2023) Ergonomics Considerations in Air Traffic Conflict Detection and Resolution. INTERNATIONAL JOURNAL OF TECHNOLOGY, 14 (4). pp. 898-910. ISSN 2086-9614

Wahyuni, Sari and Riswan, Muhammad and Adrianto, Nanang and Dharmawan, Mahardika Yoga and Tumbelaka, Rivaldo Marsel and Cuana, Rona and Istiqomah, Nurul Imani and Jiananda, Adhistinka and Garcia, Shania and Suharyadi, Edi (2023) Localized surface plasmon resonance properties dependence of green-synthesized Fe3O4/Ag composite nanoparticles on Ag concentration and an electric field for biosensor application. Photonics and Nanostructures - Fundamentals and Applications, 57. ISSN 15694429

Wibowo, Budhi S. and Fransoo, Jan C. (2023) Performance analysis of a drop-swap terminal to mitigate truck congestion at chemical sites. Flexible Services and Manufacturing Journal, 35 (2). pp. 416-454. ISSN 19366590

Wibowo, Budhi S. and Prakoso, Yoga J. and Masruroh, Nur Aini (2023) Performance of judgmental - statistical forecast combination strategies under product-market configurations. International Journal of Management Science and Engineering Management, 18 (2). pp. 104-117. ISSN 17509661

Wibowo, Heri and Surahmanto, Fredy and Ilman, Mochammad Noer (2023) Identifying the Influence of Transient Thermal Tensioning Treatments on Minimizing Distortion and Improving Fatigue Behavior of Steel Welded. Eastern-European Journal of Enterprise Technologies, 4 (12(124). pp. 1-10. ISSN 17294061

Widyatama, Arif and Venter, Mandi and Orejon, Daniel and Sefiane, Khellil (2023) Experimental investigation of bubble dynamics and flow patterns during flow boiling in high aspect ratio microchannels with the effect of flow orientation. International Journal of Thermal Sciences, 189: 108238. pp. 1-22. ISSN 12900729

Widyatama, Arif and Venter, Mandi and Orejon, Daniel and Sefiane, Khellil (2023) Experimental investigation of bubble dynamics and flow patterns during flow boiling in high aspect ratio microchannels with the effect of flow orientation. INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 189: 108238. pp. 1-22. ISSN 1290-0729

Wigati, Slamet Setio and Sopha, Bertha Maya and Asih, Anna Maria Sri and Sutanta, Heri (2023) Geographic Information System Based Suitable Temporary Shelter Location for Mount Merapi Eruption. Sustainability (Switzerland), 15 (3): 2073. pp. 1-26. ISSN 20711050

Wijayanta, Setya and Deendarlianto, Deendarlianto and Indarto, Indarto and Prasetyo, Ari and Hudaya, Akhmad Zidni (2023) The effect of the liquid physical properties on the wave frequency and wave velocity of co-current gas-liquid stratified two-phase flow in a horizontal pipe. International Journal of Multiphase Flow, 158 (104300). pp. 1-20. ISSN 03019322

Witchuda, Thongking and Wiranata, Ardi and Maeda, Shingo and Premachandra, Chinthaka (2023) Reservoir Computing Model for Human Hand Locomotion Signal Classification. IEEE Access, 11. pp. 19591-19601. ISSN 21693536

Yuana, Kumara Ari and Andreanto, Prima and Budiana, Eko Prasetya and Deendarlianto, Deendarlianto and Indarto, Indarto (2023) Transient Lattice Boltzmann Numerical Simulation during the Dewetting of Liquid Droplet on a Flat Surface. Computers and Fluids, 255: 105836. pp. 1-20. ISSN 00457930

Conference or Workshop Item

Kok, Y. H. and Kamarulzaman, N. and Shadzalli, Z. F. Mohd and Manaf, N. Abdul and Shah, Ku Nur Afrina Ku Azman and Yusop, Mohd Zamri Mohd and Rohani, Jafri Mohd and Hartono, Budi and Tuyen, Nguyen Duc (2023) Control Analysis of Biomass Gasification with Combined Heat and Power System. In: Proceedings of the 2nd Energy Security and Chemical Engineering Congress, Malaysia.

Supriyanto, Eko and Cahyo, Nur and Nugraha, Ariyana Dwiputra and Sentanuhady, Jayan and Muflikhun, M. Akhsin (2023) Experimental Study of Flow and Spray Pattern Characteristics of Biodiesel in a Swirler Burner. In: Proceedings of 2023 4th International Conference on High Voltage Engineering and Power Systems, ICHVEPS 2023.

Syafputra, Muhamad Apriyudi and Waluyo, Joko and Imawan, Roni (2023) Optimization of Configuration Hybrid Power Generation System at Oil Refinery. In: Proceedings of 2023 4th International Conference on High Voltage Engineering and Power Systems, ICHVEPS 2023, 6 Agustus 2023 - 10 Agustus 2023, Bali Indonesia.

Widhiyanuriyawan, Denny and Hamidi, Nurcholish and Darjito, Darjito and Hatib, Rustan and Widhiyanurrochmansyah, Reynolds (2023) Fabrication of Perovskite Solar Cell (PSC) Using NiO/GO Material. In: 2023 3rd International Conference on Electronic and Electrical Engineering and Intelligent System (ICE3IS), 9-10 Agustus 2023, Yogyakarta, Indonesia.

Widyatama, Arif and Orejon, Daniel and Sefiane, Khellil (2023) Thermal Characteristics of Flow Boiling of HFE-7000 in High Aspect Ratio Microchannels with The Effect of Flow Orientation. In: International Heat Transfer Conference 17, 14-18 Agustus 2023, Cape Town, South Africa.

This list was generated on Fri Nov 8 01:01:09 2024 WIB.