Widyorini, Ragil (2020) Evaluation of physical and mechanical properties of particleboard made from petung bamboo using sucrose-based adhesive. BioResources, 15 (3). 5072 – 5086. ISSN 19302126
![[thumbnail of Widyorini 2020.pdf]](https://ir.lib.ugm.ac.id/style/images/fileicons/text.png)
Widyorini 2020.pdf - Published Version
Restricted to Registered users only
Download (346kB) | Request a copy
Abstract
Bamboo is a potential non-wood lignocellulosic material from which to make particleboard. Sucrose-based adhesive is another potential ingredient, but its use in particleboard has been limited. Addition of ammonium dihydrogen phosphate (ADP) can be used to increase the bonding ability of sucrose-based adhesive and to reduce the required pressing temperature. Therefore, this research used different pressing temperatures and sucrose/ammonium dihydrogen phosphate (ADP) composition ratios to optimize the properties of particleboards. The physical and mechanical properties of the boards were analyzed and compared with the JIS A 5908 (2003) standard for particleboard. The results showed that the interaction of the sucrose-ADP composition ratio and the pressing temperature significantly affected the physical and mechanical properties of the particleboards. The particleboard using only sucrose as adhesive had optimum properties at 200 *C; however, after addition of ADP, the intended properties could be achieved at a 160 °C pressing temperature. © 2020, North Carolina State University.
Item Type: | Article |
---|---|
Additional Information: | Cited by: 11; All Open Access, Gold Open Access |
Uncontrolled Keywords: | Adhesives; Bamboo; Mechanical Properties; Plastic Deformation; Pressing; Sucrose; Temperature; Bamboo; Mechanical properties; Particle board; Plastic deformation; Sugar (sucrose); Ammonium dihydrogen phosphate; Bonding ability; Composition ratio; Dihydrogen phosphate; Lignocellulosic material; Optimum properties; Physical and mechanical properties; Pressing temperature; Adhesives |
Subjects: | S Agriculture > SD Forestry |
Divisions: | Faculty of Forestry > Departemen Tehnologi Hasil Hutan |
Depositing User: | Sri JUNANDI |
Date Deposited: | 06 Feb 2025 02:05 |
Last Modified: | 06 Feb 2025 02:05 |
URI: | https://ir.lib.ugm.ac.id/id/eprint/14240 |