Items where Division is "Mechanical and Industrial Engineering Department" and Year is 2019

A

Ardiyanto, Ardiyanto and Wirasadha, Dhanaya A. and Wulandari, Novi W. and Dharma, Igb Gusti Bagus Budi (2019) An investigation of the maximum acceptable weight of lift by Indonesian inexperienced female manual material handlers. In: Proceedings of the 20th Congress of the International Ergonomics Association (IEA 2018).

Arifvianto, Budi and Putra, A. T. and Prayoga, B. T. and Dharmastiti, Rini and Salim, Urip Agus and Mahardika, Muslim and Suyitno, Suyitno (2019) Sliding wear characteristics of FDM-processed polylactic-acid in bovine blood serum. Journal of Mechanical Engineering and Sciences, 13 (4). 5848 - 5861. ISSN 22894659

Arifvianto, Budi and Putra, A. T. and Prayoga, B. T. and Mahardika, Muslim and Suyitno, Suyitno (2019) Characterization of the Wear Resistance of 3D Printed Polylactic-Acid (PLA) in Water and Bovine Serum. In: IOP Conference Series: Materials Science and Engineering, 2019.

Arifvianto, Budi and Suyitno, Suyitno and Mahardika, Muslim (2019) Degradation of mechanically surface treated az31b magnesium alloy in 3.5 wt. nacl solution. Materials Science Forum, 948 MS. 237 - 242. ISSN 02555476

B

Bahiuddin, Irfan and Abd Fatah, Abdul Yasser and Mazlan, Saiful Amri and Shapiai, M. I. and Imaduddin, Fitrian and Ubaidillah, Ubaidillah and Utami, Dewi and Muhtazaruddin, Mohd Nabil Bin (2019) Comparing the linear and logarithm normalized extreme learning machine in flow curve modeling of magnetorheological fluid. Indonesian Journal of Electrical Engineering and Computer Science, 13 (3). 1065 - 1072. ISSN 25024752

Baroroh, Dawi Karomati and Amalia, Mya and Lestari, Nur Puji (2019) Kansei engineering approach for developing electric motorcycle. Communications in Science and Technology, 4 (2). 50 - 56. ISSN 25029258

Bramantya, M. A. and Yusabih, Ariefa (2019) Electric duct fan uav with telemetry system using yagi-uda antenna. International Journal of Scientific and Technology Research, 8 (9). 96 - 100. ISSN 22778616

C

Cahyo, Budiyantoro and Rochardjo, Heru Santoso B. and Gesang, Nugroho (2019) Effect of processing parameter on tensile properties of lamina unidirectional carbon fiber reinforced polyamide-6. In: 5th International Conference on Science and Technology, 2019.

D

Dewi, Nurul Aulia and Tontowi, Alva Edy (2019) Optimization of Design Parameters of Biodegradable Magnesium-Based Alloy AZ31 Stent Using Response Surface Method. In: 2nd International Conference on Bioinformatics, Biotechnology and Biomedical Engineering - Bioinformatics and Biomedical Engineering, 2019.

Dharma, Irfan Aditya and Widyaparaga, Adhika and Faza, Fakhri Ilham (2019) Performance Evaluation of a Liquid-Liquid Cylindrical Cyclone (LLCC) for Oil-Water Separation. In: 4th International Conference on Science, Technology and Interdisciplinary Research, IC-STAR 2018.

H

Handoko, Handoko and Suyitno, Suyitno and Dharmastiti, Rini and Magetsari, Rahadyan (2019) Wear Prediction of UHMWPE Cup Against Commercially Pure Titanium Hip Implant with the Nonlinear Load and Contact Area Wear Equation. In: IOP Conference Series: Materials Science and Engineering, 2019.

Hartono, Budi and Sulistyo, Sinta Rahmawidya and Chai, Kahhin and Indarti, Nurul (2019) Knowledge Management Maturity and Performance in a Project Environment: Moderating Roles of Firm Size and Project Complexity. Journal of Management in Engineering, 35 (6). ISSN 0742597X

Hartono, Budi and Sulistyo, Sinta Rahmawidya and Umam, Miftachul (2019) Leadership profiles of successful project managers in Indonesia. Journal of Industrial Engineering and Management, 12 (2). 274 - 301. ISSN 20138423

Herianto, Herianto and Arifsa, Faris B. and Prastowo, Aishah Rumaysa (2019) Application of taguchi method in the optimization of 3D-printer process parameters for dimensional accuracy and surface roughness. Journal of Manufacturing Technology Research, 11 (1-2). 55 - 69. ISSN 19438095

Herianto, Herianto and Wira, Irawan and Syahirul, Ritonga Alim and Aishah, Prastowo (2019) Design and fabrication in the loop of soft pneumatic actuators using fused deposition modelling. Sensors and Actuators A: Physical, 298. ISSN 09244247

Hudaya, Akhmad Zidni and Widyatama, Arif and Dinaryanto, Okto and Juwana, Wibawa Endra and Indarto, null and Deendarlianto, Deendarlianto (2019) The liquid wave characteristics during the transportation of air-water stratified co-current two-phase flow in a horizontal pipe. Experimental Thermal and Fluid Science, 103. 304 - 317. ISSN 08941777

I

Ilhami, M. A. and Subagyo, Subagyo and Masruroh, Nur Aini (2019) Bibliometric analysis of the term 'Three-Dimensional Concurrent Engineering'. In: IOP Conference Series: Materials Science and Engineering, 2019.

Iswanto, P. T. and Akhyar, Akhyar and Maliwemu, Erich Umbu Kondi (2019) Fatigue crack growth rate of motorcycle wheel fabricated by centrifugal casting. Metalurgija, 58 (1). 51 - 54. ISSN 05435846

J

Jason, Andreas and Asih, A. M. S. and Yuniarto, Hari Agung (2019) Analysis of coal allocation on steam power plants and the effect of multi-suppliers, demand and time variations on coal's safety stock. In: Broad Exposure to Science and Technology 2019, 7-8 Agustus 2019, Bali.

K

Kuo, Ren Jieh and Prasetyo, Brahman and Wibowo, Budhi Sholeh (2019) Deep Learning-Based Approach for Air Quality Forecasting by Using Recurrent Neural Network with Gaussian Process in Taiwan. In: 6th International Conference on Industrial Engineering and Applications, 2019.

Kurniawan, Yani A. and Mahardika, Muslim and Suyitno, Suyitno and Haritsah Amrullah, Muhammad (2019) Effect of preheating on punch force, sheared surface and work hardening in cold punching process of commercially pure titanium sheet. International Review of Mechanical Engineering, 13 (9). 504 - 512. ISSN 19708734

L

Liu, Yisi and Lan, Zirui and Trapsilawati, Fitri and Sourina, Olga and Chen, Chunhsien and Mueller-Wittig, Wolfgang (2019) EEG-Based human factors evaluation of air traffic control operators (ATCOs) for optimal training. In: International Conference on Cyberworlds, 2019.

M

Maliwemu, Erich Umbu Kondi and Malau, Viktor and Iswanto, Priyo Tri (2019) Corrosion Resistance of 316L Biomaterial in Simulated Body Fluid by Modification of Shot Distance and Shot Angle of Shot Peening. In: IOP Conference Series: Materials Science and Engineering, 2019.

Marlyana, N. and Tontowi, Alva Edy and Yuniarto, Hari Agung (2019) Development sophistication degree of new components of technometrics using concept mapping. In: International Conference on Industrial Engineering and Operations Management, March 5 -7 , 2019, Bangkok, Thailand.

Masnur, Dedy and Suyitno, Suyitno and Malau, Viktor (2019) The Influence of Mold Material on Cooling Curve, Solidification Parameters, and Micro-hardness of Al-6wt.Si in Unidirectional Solidification. In: IOP Conference Series: Materials Science and Engineering, 2019.

N

Narendra, Alfa and Malkhamah, Siti and Sopha, Bertha Maya (2019) The modeling of dwelling time of buses at bus stop. In: IOP Conference Series: Materials Science and Engineering, 2019.

Nawangsari, Putri and Jamasri, Jamasri and Rochardjo, Heru S.B. and Waskito, Arif Tri (2019) BaSO4-friction dust filler improves friction characteristic in non-asbestos brake pad composite. International Review of Mechanical Engineering, 13 (9). 513 - 522. ISSN 19708734

Nawangsari, Putri and Jamasri, undefined and Rochardjo, Heru S.B. (2019) Effect of Phenolic Resin on Density, Porosity, Hardness, Thermal Stability, and Friction Performance as A Binder in Non-Asbestos Organic Brake Pad. In: International Conference on Design and Application of Engineering Materials (IC-DAEM) in conjunction with Seminar Nasional Metalurgi dan Material XI (SENAMM) 6–7 September 2018, Bandung, Indonesia.

Nugraha, Maulana G. and Saptoadi, Harwin and Hidayat, Muslikhin and Andersson, Bengt à ke and Andersson, Ronnie (2019) Particle modelling in biomass combustion using orthogonal collocation. Applied Energy, 255. ISSN 03062619

Nugroho, Gesang and Yanuar, Yarabisa and Wibowo, Praberta Ardi (2019) Flight Test of Pasopati Electrical Cruise Missile. In: International Conference on Advanced Mechatronics, Intelligent Manufacture and Industrial Automation, 2019.

P

Pitaloka, Elok and Masruroh, Nur Aini and Lin, Shi Woei (2019) Decision Bias in the Newsvendor Problem: On the Comparison of Managers and Students as Newsvendors with Decision Support System as Debiasing Strategy. In: IEEE International Conference on Industrial Engineering and Engineering Management, 2019.

Putra, Ryan Anugrah and Neumann-Kipping, Martin and Schafer, Thomas and Lucas, Dirk (2019) Comparison of gas-liquid flow characteristics in geometrically different swirl generating devices. Energies, 12 (24). ISSN 1996-1073

Putra, Ryan Anugrah and Ramadhona, Aditya (2019) CFD study on the flow in various swirl generating devices. In: 5th International Conference on Science and Technology (ICST), Yogyakarta, Indonesia.

Putra, Vinsensius Tiara and Sriwijaya, Rachmat A. (2019) New design of aircraft seat main frame. In: 5th International Conference on Science and Technology (ICST), Yogyakarta, Indonesia.

R

Rahman, Muhammad Aulia and Widyatama, Arif and Majid, Akmal Irfan and Suhanan, Suhanan (2019) Peltier thermoelectric refrigeration system as the future cold storage system for indonesia: A review. In: 2019 5th International Conference on Science and Technology (ICST), 30-31 July 2019, Yogyakarta, Indonesia.

Rizaldi, Muhammad Ilham and Rahman, Arif and Deendarlianto, Deendarlianto and Betawati Prihantini, Nining Betawati and Nasruddin, N. (2019) Generation of microbubbles through single loop and double loop fluid oscillator for photobioreactor aeration. International Journal of Technology, 10 (7). 1446 - 1452. ISSN 20869614

Rizalmi, Sigit Rahmat and Wijayanto, Titis and Rossano, Ruliff and Trapsilawati, Fitri and Marcillia, Syam Rachma and Lufityanto, Galang (2019) The effect of passenger interaction on situation awareness and driving performance in sleep-deprived condition. In: 5th International Conference on Science and Technology (ICST), Yogyakarta, Indonesia.

Rochardjo, Heru S.B. and Jamasri, Jamasri and Yudhanto, Ferriawan (2019) Extraction of natural fibers by high-speed blender to produce cellulose sheet composite. International Review of Mechanical Engineering, 13 (12). 691 - 699. ISSN 19708734

Rochardjo, Heru S.B. and Muhammad, Ridlo (2019) Effects of fiber contents on wear resistance of salacca zalacca frond fiber reinforced phenolic. Materials Science Forum, 948 MS. 181 - 185. ISSN 02555476

S

Sakti, S. and Panjaitan, A. E. D. and Asih, A. M. S. and Sopha, B. M. (2019) A Computerized measurement system of machine performance for a textile industry. In: IOP Conference Series: Materials Science and Engineering, 2019.

Setyana, Lilik Dwi and Mahardika, Muslim and Suyitno, null (2019) Characteristics of stainless steel 316L artificial lumbar disk model made by investment casting. In: 5th International Conference on Science and Technology (ICST), Yogyakarta, Indonesia.

Slamet, Sugeng and Kusumaningtyas, Indraswari K. and Suyitno, null (2019) Forging process on gamelan bar tin bronze Cu-25wt.Sn post casting deformation to changes in microstructure, density, hardness, and acoustic properties. In: IOP Conference Series: Materials Science and Engineering.

Slamet, Sugeng and Suyitno, Suyitno and Kusumaningtyas, Indraswari K. (2019) Effect of composition and pouring temperature of Cu(20-24)wt.Sn by sand casting on fluidity and mechanical properties. Journal of Mechanical Engineering and Sciences, 13 (4). 6022 - 6035. ISSN 22894659

Slamet, Sugeng and Suyitno, null and Kusumaningtyas, Indraswari K. (2019) Effect of Composition and Pouring Temperature of Cu-Sn Alloys on the Fluidity and Microstructure by Investment Casting. In: International Conference on Design and Application of Engineering Materials (IC-DAEM) in conjunction with Seminar Nasional Metalurgi dan Material XI (SENAMM) 6–7 September 2018, Bandung.

Sopha, B. M. and Asih, A. M. S. (2019) Identifying aid items of survival kit for natural disasters. In: Broad Exposure to Science and Technology 2019.

Sutrisno, Sutrisno and Rohmat, Tri Agung and Wibowo, Setyawan Bekti and Iswahyudi, Sigit (2019) Vortex dynamics study of the canard deflection angles' influence on the Sukhoi Su-30-like model to improve stall delays at high AoA. Aerospace, 6 (2). ISSN 22264310

Suwarno, Dita Chasanah Dewi and Wijayanto, Titis and Trapsilawati, Fitri (2019) Cybersickness Evaluation while using Driving Simulator in a Head-Mounted Display Environment. In: International Conference on Mechatronics, Robotics and Systems Engineering, 2019.

T

Tontowi, Alva Edy and Ramadhani, Ogy Satria and Sukiman, Sukiman and Dewi, Nurul Aulia and Taufiq, Nahar (2019) Expanded Diameter of Coronary Metal Stent: Simulation and Experiment. In: 2nd International Conference on Bioinformatics, Biotechnology and Biomedical Engineering - Bioinformatics and Biomedical Engineering, 2019.

Trapsilawati, Fitri and Arini, Hilya Mudrika and Wijayanto, Titis and Widyanti, Ari and Wibawa, Adhi Dharma and Muslim, Khoirul (2019) Development of Trust-Integrated Technology Acceptance Model for eHealth Based on MetaAnalytic Findings. In: 2nd International Conference on Bioinformatics, Biotechnology and Biomedical Engineering - Bioinformatics and Biomedical Engineering, 2019.

Trapsilawati, Fitri and Wijayanto, Titis and Jourdy, Eggie Septiawan (2019) Human-computer trust in navigation systems: Google maps vs Waze. Communications in Science and Technology, 4 (1). 38 - 43. ISSN 25029258

Trapsilawati, Fitri and Wijayanto, Titis and Ushada, Mirwan (2019) A preliminary study of EEG-based kansei engineering: An illustration on a squishy case study. In: 5th International Conference on Science and Technology, 2019.

W

Wibawa, Adhi Dharma and Hakim, Lutfi and Widyanti, Ari and Muslim, Khoirul and Wijayanto, Titis and Trapsilawati, Fitri and Arini, Hilya Mudrika (2019) Physiological Pattern of Emotion in Elderly Based on Pulse Rate Variability Features: A preliminary study of e-Health monitoring system. In: 6th International Conference on Instrumentation, Control, and Automation (ICA) Bandung, Indonesia. 31 July – 2 August 2019.

Wibowo, Budhi Sholeh and Masrurah, Nur Aini and Kasanah, Yulinda Uswatun and Trapsilawati, Fitri and Subagyo, Subagyo and Ilhami, Muhammad Adha (2019) Toward a taxonomy of micro and small manufacturing enterprises. Communications in Science and Technology, 4 (2). 74 - 80. ISSN 25029258

Wibowo, Setyawan Bekti and Fajar, Muhammad and Naufal, Wega Fawwa and Fernando Sinurat, David and Sutrisno, Sutrisno and Basuki, Budi (2019) Comparison of aerodynamic characteristics on sukhoi SU-33-like and F-35 lightning II-like models using water tunnel flow visualization technique. In: 5th International Conference on Science and Technology, 2019.

Wibowo, Setyawan Bekti and Sutrisno, Sutrisno and Rohmat, Tri Agung (2019) Computational study of flow interactions over a close coupled canard-wing on fighter. International Journal of Aviation, Aeronautics, and Aerospace, 6 (1). ISSN 2374-6793

Wibowo, Setyawan Bekti and Sutrisno, Sutrisno and Rohmat, Tri Agung (2019) Study of mesh independence on the computational model of the roll-up vortex phenomenon on fighter and delta wing models. International Journal of Fluid Mechanics Research, 46 (5). 427 - 439. ISSN 21525102