Items where Division is "Mechanical and Industrial Engineering Department" and Year is 2020

A

Adiputra, Dimas and Azizi Abdul Rahman, Mohd and Bahiuddin, Irfan and Ubaidillah, Ubaidillah and Imaduddin, Fitrian and Nazmi, Nurhazimah (2020) Sensor Number Optimization Using Neural Network for Ankle Foot Orthosis Equipped with Magnetorheological Brake. Open Engineering, 11 (1). 91 – 101. ISSN 23915439

Aklis, N. and Rohmat, T.A. and Saptoadi, H. (2020) Mapping of Circulating Rate to Determine Non-mechanic Valve Operation in Dual Fluidized Bed Gasifier Cold Flow Model. Lecture Notes in Mechanical Engineering. 745 – 754. ISSN 21954356

Amin, M. and Rubijanto, J. P. and Jamasri, Jamasri (2020) INVESTIGATION OF THERMAL SHOCK BEHAVIOR IN EXTRUDED CLAY/COPPER-ZINC COMPOSITE MEMBRANES. COMPOSITES-MECHANICS COMPUTATIONS APPLICATIONS, 11 (1). pp. 15-24. ISSN 2152-2057

Arifvianto, Budi and Mahardika, Muslim and Salim, Urip Agus and Suyitno, Suyitno (2020) Comparison of surface characteristics of medical-grade 316L stainless steel processed by sand-blasting, slag ball-blasting and shot-blasting treatments. Journal of Engineering and Technological Sciences, 52 (1). 1 – 13. ISSN 23375779

Arifvianto, Budi and Mahardika, Muslim and Salim, Urip Agus and Suyitno, Suyitno (2020) The influence of SMAT and polishing on the degradation of AZ31B magnesium alloy in 3.5 wt. NaCl solution. Key Engineering Materials, 840 KE. 377 – 382. ISSN 10139826

B

Budiana, Eko Prasetya and Pranowo, Pranowo and Deendarlianto, Deendarlianto and Indarto, Indarto (2020) The meshless numerical simulation of Kelvin-Helmholtz instability during the wave growth of liquid-liquid slug flow. COMPUTERS & MATHEMATICS WITH APPLICATIONS, 80 (7). pp. 1810-1838. ISSN 0898-1221

Budiana, Eko Prasetya and Pranowo, Pranowo and Indarto, Indarto and Deendarlianto, Deendarlianto (2020) Meshless numerical model based on radial basis function (RBF) method to simulate the Rayleigh–Taylor instability (RTI). Computers and Fluids, 201. ISSN 00457930

Budiana, Eko Prasetya and Pranowo, Pranowo and Indarto, Indarto and Deendarlianto, Deendarlianto (2020) The meshless numerical simulation of Kelvin Helmholtz instability during the wave growth of liquid liquid slug flow. Computers and Mathematics with Applications, 80 (7). 1810 - 1838. ISSN 08981221

Budiana, Eko Prasetya and Pranowo, Pranowo and Indarto, null and Deendarlianto, Deendarlianto (2020) Meshless numerical model based on radial basis function (RBF) method to simulate the Rayleigh-Taylor instability (RTI). Computers and Fluids, 201. ISSN 00457930

Budiyantoro, Cahyo and Rochardjo, Heru S. B. and Nugroho, Gesang (2020) Effects of Processing Variables of Extrusion-Pultrusion Method on the Impregnation Quality of Thermoplastic Composite Filaments. POLYMERS, 12 (12).

C

Caroko, Novi and Saptoadi, Harwin and Rohmat, Tri Agung (2020) COMPARATIVE STUDY ON THE DRYING OF OIL PALM SOLID WASTE USING CONVENTIONAL AND MICROWAVE METHODS. JOURNAL OF ENGINEERING SCIENCE AND TECHNOLOGY, 15 (4). pp. 2696-2711.

Caroko, Novi and Saptoadi, Harwin and Rohmat, Tri Agung (2020) Comparative study on the drying of oil palm solid waste using conventional and microwave methods. Journal of Engineering Science and Technology, 15 (4). 2696 – 2711. ISSN 18234690

Caroko, Novi and Saptoadi, Harwin and Rohmat, Tri Agung (2020) A review on microwave-assisted co-pyrolysis of biomass-polymers. International Review of Mechanical Engineering, 14 (5). 339 – 350. ISSN 19708734

D

Darmawan, Agus and Wong, Hartanto and Thorstenson, Anders (2020) Integrated sales and operations planning with multiple products: Jointly optimizing the number and timing of promotions and production decisions. APPLIED MATHEMATICAL MODELLING, 80. pp. 792-814. ISSN 0307-904X

Deendarlianto, Deendarlianto and Widyaparaga, Adhika and Widodo, Tri and Handika, Irine and Setiawan, Indra Chandra and Lindasista, Alia (2020) Modelling of Indonesian road transport energy sector in order to fulfill the national energy and oil reduction targets. RENEWABLE ENERGY, 146. pp. 504-518. ISSN 0960-1481

Den, Rethy and Dharmastiti, Rini and Nuryono, Nuryono and Yuliatun, Leny and Widjijono, Widjijono (2020) Effect of varying water-to-powder ratios on compressive strength and porosity of mineral trioxide aggregate. Key Engineering Materials, 840 KE. 345 – 350. ISSN 10139826

Dharmika, Nararya Ahmad and Maruti, Sugandhini Cakra and Sakti, Sekar and Asih, Anna Maria Sri (2020) Multi-Objective Location Routing Problem with Time Windows for Cost Minimization and Customer Service Level Maximization. In: 6th International Conference on Science and Technology, ICST 2020 Yogyakarta 7 September 2020.

Dianita, Orchida and Djorgie, Thomas and Herliansyah, M.K. (2020) Improvement of Production Layout in the Furniture Industry in Indonesia with the Concept of Group Technology. Advances in Intelligent Systems and Computing, 1121 A. 304 – 310. ISSN 21945357

Dimas, Abdillah Akbar and Kusmono, Kusmono and Muhammad, Waziz Wildan and Mochammad, Noer Ilman (2020) Extraction and characterization of nanocrystalline cellulose (Ncc) from ramie fiber by hydrochloric acid hydrolysis. Key Engineering Materials, 867 KE. 109 – 116. ISSN 10139826

G

Guna, Stephanie Dwi and Nita, Yureya and Premono, Shoddiq Jati (2020) Barriers and opportunities of using electronic nursing record in Indonesia: Nurses perspective. ICIC Express Letters, Part B: Applications, 11 (12). 1159 - 1164. ISSN 21852766

H

Hadiwibowo, Suryo and Wisambodhi, Satria Mahardhika and Mahardika, Muslim and Perdana, Indra (2020) Design of PLC-based Control System for 18650 Lithium-ion Battery Dismantling Machine. In: International Conference on Applied Sciences, Information and Technology 2019, 1-3 November 2019, Padang, Indonesia.

Handoko, Handoko and Suyitno, Suyitno and Dharmastiti, Rini and Magetsari, Rahadyan (2020) Numerical convergence in wear volume prediction of uhmwpe acetabular cup paired with cp ti femoral head hip implants. Key Engineering Materials, 867 KE. 148 – 158. ISSN 10139826

Hapipi, Norhiwani Mohd and Mazlan, Saiful Amri and Ubaidillah, U. and Homma, Koji and Aziz, Siti Aishah Abdul and Nordin, Nur Azmah and Bahiuddin, Irfan and Nazmi, Nurhazimah (2020) The Rheological Studies on Poly(vinyl) Alcohol-Based Hydrogel Magnetorheological Plastomer. POLYMERS, 12 (10). ISSN 2073-4360

Hartono, Budi and Dzulfikar, Luthfi and Damayanti, Retno (2020) Impact of team diversity and conflict on project performance in indonesian start-ups. Journal of Industrial Engineering and Management, 13 (1). 155 – 178. ISSN 20138423

Herianto, Herianto and Atsani, S.I. and Mastrisiswadi, H. (2020) Recycled Polypropylene Filament for 3D Printer: Extrusion Process Parameter Optimization. In: IOP Conference Series: Materials Science and Engineering.

Herianto, Herianto and Riyadi, A.F. and Mastrisiswadi, H. (2020) NCTF Control Performance Analysis on Rehabilitation Robot. In: 3rd International Conference on Engineering Technology for Sustainable Development, ICET4SD 2019 Yogyakarta 23 October 2019.

Hidayati, Isti and Tan, Wendy and Yamu, Claudia (2020) How gender differences and perceptions of safety shape urban mobility in Southeast Asia. TRANSPORTATION RESEARCH PART F-TRAFFIC PSYCHOLOGY AND BEHAVIOUR, 73. pp. 155-173. ISSN 1369-8478

I

Ilhami, Muhammad Adha and Subagyo, Subagyo and Masruroh, Nur Aini (2020) A mathematical model at the detailed design phase in the 3DCE new product development. COMPUTERS & INDUSTRIAL ENGINEERING, 146. ISSN 0360-8352

Ilman, M. N. and Sehono, Sehono and Muslih, M. R. and Wibowo, H. (2020) The application of transient thermal tensioning for improving fatigue crack growth resistance of AA5083-H116 FSW joints by varying secondary heating temperature. INTERNATIONAL JOURNAL OF FATIGUE, 133. ISSN 0142-1123

Ilman, M.N. and Sriwijaya, R.A. and Muslih, M.R. and Triwibowo, N.A. and Sehono, Sehono (2020) Strength and fatigue crack growth behaviours of metal inert gas AA5083-H116 welded joints under in-process vibrational treatment. Journal of Manufacturing Processes, 59. 727 – 738. ISSN 15266125

Ismail, Ismail and Azmi, Azhim Asyaratul and Pane, Erlanda Augupta and Kamal, Samsul (2020) Characteristics of wind velocity and turbulence intensity at horizontal axis wind turbines array. International Journal on Engineering Applications, 8 (1). 22 – 31. ISSN 22812881

Ismianti, Ismianti and Herianto, Herianto (2020) Adoption of 3D Printing in Indonesia and Prediction of Its Application in 2025. In: 3rd International Conference on Engineering Technology for Sustainable Development, ICET4SD 2019 Yogyakarta 23 October 2019.

Iswahyudi, Sigit and Sutrisno, Sutrisno and Prajitno, Prajitno and Wibowo, Setyawan Bekti (2020) Airfoil types effect on geometry and performance of a small-scale wind turbine blade design. Journal of Applied Engineering Science, 18 (1). 132 – 139. ISSN 14514117

Iswahyudi, Sigit and Sutrisno, Sutrisno and Prajitno, Prajitno and Wibowo, Setyawan Bekti (2020) Effect of blade tip shapes on the performance of a small HAWT: An investigation in a wind tunnel. Case Studies in Thermal Engineering, 19. ISSN 2214157X

Iswahyudi, Sigit and Sutrisno, Sutrisno and Prajitno, Prajitno and Wibowo, Setyawan Bekti (2020) Effect of blade tip shapes on the performance of a small HAWT: An investigation in a wind tunnel. CASE STUDIES IN THERMAL ENGINEERING, 19. ISSN 2214-157X

Iswanto, P. T. and Akhyar, Akhyar and Pambekti, A. (2020) HEAT TREATMENT T4 AND T6 EFFECTS ON MECHANICAL PROPERTIES IN AL-CU ALLOY AFTER REMELT WITH DIFFERENT POURING TEMPERATURES. Metalurgija, 59 (2). pp. 171-174. ISSN 05435846

Iswanto, P. T. and Yaqin, R. I. and Akhyar, Akhyar and Sadida, H. M. (2020) INFLUENCE OF SHOT PEENING ON SURFACE PROPERTIES AND CORROSION RESISTANCE OF IMPLANT MATERIAL AISI 3161. Metalurgija, 59 (3). pp. 309-312. ISSN 05435846

Iswanto, P.T. and Maliwemu, E.U.K. and Malau, V. and Imaduddin, F. and Sadida, H.M. (2020) Surface roughness, hardness, and fatigue-corrosion characteristic of AISI 316L by shot peening. Metalurgija, 59 (2). 183 – 186. ISSN 05435846

Iswanto, P.T. and Yaqin, R.I. and Akhyar, Akhyar and Sadida, H.M. (2020) Influence of shot peening on surface properties and corrosion resistance of implant material AISI 316L. Metalurgija, 59 (3). 309 – 312. ISSN 05435846

Iswanto, Priyo Tri and Hasan, Akhyar and Janata, Aditya and Mauludin, Luthfi Muhammad and Sadida, Hizba Muhammad (2020) Fatigue behavior improvement of a356 aluminum alloy of motorcycle cast wheel produced by high speed centrifugal casting based on t6 heat treatment and artificial aging. Materials Science Forum, 991 MS. 86 – 93. ISSN 02555476

K

Kurniawan, Yani and Mahardika, Muslim and Suyitno, Suyitno (2020) THE EFFECT OF PUNCH GEOMETRY ON PUNCHING PROCESS IN TITANIUM SHEET. Jurnal Teknologi, 82 (2). pp. 101-111. ISSN 01279696

Kusmono, Kusmono and Bora, C. and Salim, U. A. (2020) EFFECTS OF COLD ROLLING (CR) AND ANNEALING TIME ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF AA 5052 ALUMINUM ALLOY. Metalurgija, 59 (4). pp. 485-488. ISSN 05435846

Kusmono, Kusmono and Hestiawan, H. and Jamasri, Jamasri (2020) The water absorption, mechanical and thermal properties of chemically treated woven fan palm reinforced polyester composites. JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 9 (3). pp. 4410-4420. ISSN 2238-7854

Kusmono, Kusmono and Listyanda, R. Faiz and Wildan, Muhammad Waziz and Ilman, Mochammad Noer (2020) Preparation and characterization of cellulose nanocrystal extracted from ramie fibers by sulfuric acid hydrolysis. Heliyon, 6 (11). ISSN 24058440

L

Liperda, Rahmad Inca and Pewira Redi, A.A.N. and Sekaringtyas, Nandini N. and Astiana, Handina B. and Sopha, Bertha Maya and Maria Sri Asih, Anna (2020) Simulated annealing algorithm performance on two-echelon vehicle routing problem-mapping operation with drones. In: IEEE International Conference on Industrial Engineering and Engineering Management Conference Paper 2020.

Liu, Yisi and Trapsilawati, Fitri and Lan, Zirui and Sourina, Olga and Johan, Henry and Li, Fan and Chen, Chun-Hsien and Mueller-Wittig, Wolfgang (2020) Human Factors Evaluation of ATC Operational Procedures in Relation to Use of 3D Display. Advances in Intelligent Systems and Computing, 964. 715 – 726. ISSN 21945357

M

Masnur, D. and Malau, V and Suyitno, S. (2020) The dependency of the microhardnes on microstructure and solidification parameters of directionally solidified Al-4.5wt.%Cu in clay mold. JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES, 14 (3). pp. 7125-7131. ISSN 2289-4659

Masruroh, Nur Aini and Fauziah, Hanifa Astofa and Sulistyo, Sinta Rahmawidya (2020) Integrated production scheduling and distribution allocation for multi-products considering sequence-dependent setups: a practical application. PRODUCTION ENGINEERING-RESEARCH AND DEVELOPMENT, 14 (2). pp. 191-206. ISSN 0944-6524

Muflikhun, Muhammad Akhsin and Chua, Alvin Y. (2020) Load-displacement experimental data from axial tensile loading of CFRP-SPCC hybrid laminates. DATA IN BRIEF, 29. ISSN 2352-3409

Muflikhun, Muhammad Akhsin and Chua, Alvin Y. and Santos, Gil Nonato C. (2020) Dataset of material measurement based on SEM images of Ag/TiO2 nanocomposite material synthesized via Horizontal Vapor Phase Growth (HVPG) technique. DATA IN BRIEF, 28. ISSN 2352-3409

Muflikhun, Muhammad Akhsin and Higuchi, Ryo and Yokozeki, Tomohiro and Aoki, Takahira (2020) Delamination behavior and energy release rate evaluation of CFRP/SPCC hybrid laminates under ENF test: Corrected with residual thermal stresses. COMPOSITE STRUCTURES, 236. ISSN 0263-8223

Muflikhun, Muhammad Akhsin and Higuchi, Ryo and Yokozeki, Tomohiro and Aoki, Takahira (2020) The evaluation of failure mode behavior of CFRP/Adhesive/SPCC hybrid thin laminates under axial and flexural loading for structural applications. COMPOSITES PART B-ENGINEERING, 185. ISSN 1359-8368

Muhammad, Hafidho Ilham and Rahman, Arif and Prihantini, Nining Betawati and Deendarlianto, Deendarlianto and Nasruddin, Nasruddin (2020) The application of poly-dispersed flow on rectangular airlift photobioreactor mixing performance. Evergreen, 7 (4). 571 – 579. ISSN 21890420

Murti, P. and Hyodo, H. and Biwa, T. (2020) Suppression of liquid surface instability induced by finite-amplitude oscillation in liquid piston Stirling engine. JOURNAL OF APPLIED PHYSICS, 127 (15). ISSN 0021-8979

N

Nawangsari, Putri and Jamasri, Jamasri and Rochardjo, Heru S.B. and Waskito, Arif Tri (2020) Optimization of the ternary combinations of rockwool-PAN-cellulose fibers for the best fade-recovery performance in nonasbestos organic brake pad composite. International Journal of Automotive Engineering, 11 (2). 64 – 74. ISSN 21850992

Non-Alinsavath, Khamla and Nugroho, Lukito Edi and Widyawan, Widyawan and Hamamoto, Kazuhiko (2020) Location context ontology model based on ubiquitous computing environment. In: Proceedings of 2019 the 9th International Workshop on Computer Science and Engineering, WCSE 2019.

P

Pasmawati, Yanti and Edy Tontowi, Alva and Hartono, Budi and Wijayanto, Titis (2020) Exploiting online customer reviews for product design. In: International Conference on Advanced Mechanical and Industrial engineering, 8-9 July 2020, Banten, Indonesia.

Pasmawati, Yanti and Tontowi, Alva Edy and Hartono, Budi and Wijayanto, Titis (2020) Determination Of Attributes Leveling Through Online Customer Reviews Using Natural Language Processing. In: 6th International Conference on Science and Technology, ICST 2020 Yogyakarta 7 September 2020.

Prihandana, Gunawan Setia and Mahardika, Muslim and Sriani, Tutik (2020) Micromachining in powder-mixed micro electrical discharge machining. Applied Sciences (Switzerland), 10 (11). ISSN 20763417

Pujiyulianto, Eko and Amalia, Yasmina and Wahyuningsih, Tri and Field, Frideni Y.P.G. and Mirahati, Riria Z. and Suyitno, Suyitno (2020) The effect of edm process on the microstructure of cp-titanium grade 2 and aisi 316 l in cardiovascular stent manufacturing. Key Engineering Materials, 867 KE. 1 – 7. ISSN 10139826

Purnomo, Bagiyo Condro and Setiawan, Indra Chandra and Nugroho, Heru Adi (2020) Study on cooling system for parked cars using mini air cooler and exhaust fan. Automotive Experiences, 3 (2). 81 – 88. ISSN 26156202

Putra, Ryan Anugrah and Lucas, Dirk (2020) Modeling of the free-surface vortex-driven bubble entrainment into water. Water (Switzerland), 12 (3). ISSN 20734441

R

Rahman, Muhammad Aulia and Pranoto, Indro (2020) Review on Current Thermal Issue and Cooling Technology Development on Electric Vehicles Battery. In: 2020 6th International Conference on Science and Technology (ICST), 7-8 September 2020, Yogyakarta, Indonesia.

Redi, Anak Agung Ngurah Perwira and Liperda, Rahmad Inca and Sopha, B. M. and Asih, A. M.S. and Sekaringtyas, Nandini Niramaya and Astiana, Handina Boedhy (2020) Relief Mapping Assessment using Two-Echelon Vehicle Routing Problem with Drone. In: 6th International Conference on Science and Technology (ICST), Yogyakarta, Indonesia.

Rifai, Achmad P. and Aoyama, Hideki and Tho, Nguyen Huu and Dawal, Siti Zawiah Md and Masruroh, Nur Aini (2020) Evaluation of turned and milled surfaces roughness using convolutional neural network. MEASUREMENT, 161. ISSN 0263-2241

S

Sari, Marti Widya and Herianto, Herianto and Dharma, Igb Budi and Tontowi, A.E. (2020) Design of Product Monitoring System Using Internet of Things Technology for Smart Manufacturing. In: The 7th International Conference on DV-Xα Method, 2-4 September 2019, Semarang, Indonesia.

Setiowati, N.O. and Wijayanto, T. and Trapsilawati, F. (2020) Identifying Cybersickness When Wearing a Head-Mounted Display through Heart Rate Variability Data. In: 1st International Scientific Meeting on Engineering and its Vocational Education, ISMEVD 2019 Makassar 31 October 2019.

Setyana, Lilik Dwi and Mahardika, Muslim and Suyitno, Suyitno (2020) Oblique Gate Direction During Centrifugal Casting in Artificial Lumbar Disc Model of CP-Ti. ACTA METALLURGICA SLOVACA, 26 (3). pp. 132-137. ISSN 1335-1532

Setyana, Lilik Dwi and Suyitno, Suyitno and Mahardika, Muslim (2020) Wear Behaviors of Cp-Ti and UHMWPE Artificial Lumbar Disc Designed with Various Center of Radius. In: 6th International Conference on Science and Technology (ICST), Yogyakarta, Indonesia.

Sugiyanto, Sugiyanto and Kamal, Samsul and Waluyo, Joko and Widyaparaga, Adhika (2020) Prediction of the performance of the thermoacoustic engine (CoATE) using DeltaEC. In: THERMOFLUID X: 10th International Conference on Thermofluids 2019, 5 November 2019, Yogyakarta, Indonesia.

Surahmanto, Fredy and Saptoadi, Harwin and Sulistyo, Hary and Rohmat, Tri Agung (2020) Investigation of the slow pyrolysis kinetics of oil palm solid waste by the distributed activation energy model. Biofuels, 11 (6). 663 – 670. ISSN 17597269

Surono, Untoro Budi and Saptoadi, Harwin and Rohmat, Tri Agung (2020) Improving Thermochemical and Physical Properties of Cocoa Pod Shell by Torrefaction and its Potential Utilization. INTERNATIONAL ENERGY JOURNAL, 20 (2). pp. 141-154. ISSN 1513-718X

Susanto, Wilson and Ihara, Tomonori and Hazuku, Tatsuya and Morooka, Shinichi and Kano, Sho (2020) Surface wettability enhancement on oxide film coated-steels due to gamma-ray irradiation. MECHANICAL ENGINEERING JOURNAL, 7 (3). ISSN 2187-9745

Sutrisno, Sutrisno and Deendarlianto, Deendarlianto and Rohmat, Tri Agung and Wibowo, Setyawan Bekti and Iswahyudi, Sigit (2020) Vortex dynamics analysis of straight-body-type-fuselage fighter using CFD simulation. Journal of Aerospace Technology and Management, 12 (1). ISSN 19849648

T

Tibayan, Eduardo B. and Muflikhun, Muhammad Akhsin and Villagracia, Al Rey C. and Kumar, Vipin and Santos, Gil Nonato C. (2020) Structures and UV resistance of Ag/SnO2 nanocomposite materials synthesized by horizontal vapor phase growth for coating applications. JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 9 (3). pp. 4806-4816. ISSN 2238-7854

Trapsilawati, Fitri and Herliansyah, Muhammad Kusumawan and Nugraheni, Agustyandini Sekar Asih Nur Sari and Fatikasari, Mifta Priani and Tissamodie, Gharsina (2020) EEG-Based Analysis of Air Traffic Conflict: Investigating Controllers' Situation Awareness, Stress Level and Brain Activity during Conflict Resolution. Journal of Navigation, 73 (3). 678 – 696. ISSN 03734633

Triasdian, Yayak and Pamingotan, Halomoan and Triatmodjo, Bambang and Sriwijaya, Rachmat A. and Mahardika, Muslim and Muflikhun, Muhammad Akhsin (2020) A study analysis of micro-hydro powerplant (MHPP) Potential from cooling of steam turbine. In: 2020 International Conference on Technology and Policy in Energy and Electric Power (ICT-PEP), 23-24 September 2020, Bandung, Indonesia.

Tristijanto, Hery and Ilman, Mochammad Noer and Iswanto, P. T. (2020) Corrosion Inhibition of Welded of X 52 Steel Pipelines by Sodium Molybdate in 3.5 NaCl Solution. Egyptian Journal of Petroleum, 29 (2). 155 - 162. ISSN 20902468; 11100621

Tristijanto, Hery and Ilman, Mochammad Noer and Tri Iswanto, Priyo (2020) Corrosion Inhibition of Welded of X – 52 Steel Pipelines by Sodium Molybdate in 3.5 NaCl Solution. Egyptian Journal of Petroleum, 29 (2). 155 – 162. ISSN 11100621

U

Ulfatriyani, Hesty and Adi Nugroho, Hanung Adi and Soesanti, Indah (2020) Implementing Term Frequency-Inverse Term Frequency at Tweets in Indonesian Fraud Crime Cases. 185 - 190.

W

Widyaparaga, A. and Hiromatsu, T. and Deendarlianto, Deendarlianto and Kohno, M. and Takata, Y. (2020) Acoustic field alteration in a 100 Hz dual acoustic driver straight tube travelling wave thermoacoustic heat pump for thermoacoustic heat transport control. International Journal of Heat and Mass Transfer, 151. ISSN 00179310

Widyaparaga, A. and Hiromatsu, T. and Deendarlianto, Deendarlianto and Kohno, M. and Takata, Y. (2020) Acoustic field alteration in a 100 Hz dual acoustic driver straight tube travelling wave thermoacoustic heat pump for thermoacoustic heat transport control. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 151. ISSN 0017-9310

Wiranata, Ardi and Winata, Ekrar (2020) The implementation of fast fourier transform and coherence function to detect the millimetric hole on strip iron plate. Key Engineering Materials, 840 KE. 430 – 437. ISSN 10139826

Y

Yudhanto, F. and Jamasri, Jamasri and Rochardjo, H.S.B. (2020) Physical and mechanical characterization of polyvinyl alcohol nanocomposite made from cellulose nanofibers. Materials Science Forum, 988 MS. 65 – 72. ISSN 02555476