Items where Subject is "TJ Mechanical engineering and machinery"

Group by: Creators | Item Type
Number of items at this level: 220.

Article

Agung, Erlangga Satrio and Rifai, Achmad Pratama and Wijayanto, Titis (2024) Image-based facial emotion recognition using convolutional neural network on emognition dataset. Scientific Reports, 14 (1): 14429. ISSN 20452322

Ahmad, Noesanto Dewantoro and Kusmono, Kusmono and Wildan, Muhammad Waziz and Herianto, Herianto (2023) Preparation and properties of cellulose nanocrystals-reinforced Poly (lactic acid) composite filaments for 3D printing applications. Results in Engineering, 17. ISSN 25901230

Anagra, Ignatius and Bahiuddin, Irfan and Priatomo, Herjuno Rizki and Winarno, Agustinus and Darmo, Suryo and Sandhy, Rienetta Ichmawati Delia and Mazlan, Saiful Amri (2023) Detection of coal wagon load distributions based on geometrical features using extreme learning machine methods. International Journal of Information Technology (Singapore), 16 (2). pp. 939-947. ISSN 25112112

Andoko, Andoko and Gapsari, Femiana and Prasetya, Riduwan and Sulaiman, Abdul Mudjib and Rangappa, Sanjay Mavinkere and Siengchin, Suchart (2023) Walikukun fiber as lightweight polymer reinforcement: physical, chemical, mechanical, thermal, and morphological properties. BIOMASS CONVERSION AND BIOREFINERY. pp. 1-13. ISSN 2190-6815

Anugerah, Adhe Rizky and Muttaqin, Prafajar Suksessanno and Purnama, Dwi Adi (2021) Effect of large-scale social restriction (PSBB) during COVID-19 on outdoor air quality: Evidence from five cities in DKI Jakarta Province, Indonesia. Environmental Research, 197. ISSN 00139351

Anugerah, Adhe Rizky and Muttaqin, Prafajar Suksessanno and Purnama, Dwi Adi (2021) Effect of large-scale social restriction (PSBB) during COVID-19 on outdoor air quality: Evidence from five cities in DKI Jakarta Province, Indonesia. ENVIRONMENTAL RESEARCH, 197. ISSN 0013-9351

Ardiyanto, Ardiyanto and Saraswati, Luthfia Aurensa and Rahmatika, Fanny and Afandi, Ardian Rahman and Trapsilawati, Fitri (2023) Comprehension of international safety signs: A prospective technical workers context. INTERNATIONAL JOURNAL OF INDUSTRIAL ERGONOMICS, 98. ISSN 0169-8141

Ardiyanto, Ardiyanto and Saraswati, Luthfia Aurensa and Rahmatika, Fanny and Afandi, Ardian Rahman and Trapsilawati, Fitri (2023) Comprehension of international safety signs: A prospective technical workers context. INTERNATIONAL JOURNAL OF INDUSTRIAL ERGONOMICS, 98. pp. 1-8. ISSN 0169-8141

Ariani, Farida and Suratman, Adhitasari and Siswanta, Dwi (2023) Synthesis of Dialdehyde Carboxymethyl Cellulose-Crosslinked-Chitosan for Preconcentration of Cu(II) Using Batch Method. Key Engineering Materials, 949. pp. 57-65. ISSN 16629795

Arif, Wahyudianto and Ilman, M.N. and Iswanto, P.T. and Kusmono, Kusmono and Akhyar, Akhyar (2021) The effect of tool rotation speed on hardness, tensile strength, and microstructure of dissimilar friction stir welding of dissimilar aa5083 and aa6061-t6 alloys. Key Engineering Materials, 892 KE. 159 – 168. ISSN 10139826

Arifvianto, Budi and Iman, Teguh Nur and Prayoga, Benidiktus Tulung and Dharmastiti, Rini and Salim, Urip Agus and Mahardika, Muslim and Suyitno, Suyitno (2021) Tensile properties of the FFF-processed thermoplastic polyurethane (TPU) elastomer. International Journal of Advanced Manufacturing Technology, 117 (5-6). 1709 – 1719. ISSN 02683768

Arifvianto, Budi and Iman, Teguh Nur and Prayoga, Benidiktus Tulung and Dharmastiti, Rini and Salim, Urip Agus and Mahardika, Muslim and Suyitno, Suyitno (2021) Tensile properties of the FFF-processed thermoplastic polyurethane (TPU) elastomer. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 117 (5-6). pp. 1709-1719. ISSN 0268-3768

Arifvianto, Budi and Santoso, Wahyu and Rajagukguk, Kardo and Hayyaulia, Pratyas Sarah and Salim, Urip Agus and Mahardika, Muslim and Suyitno, Suyitno (2023) Recycling of Magnesium Alloy Scrap by Remelting and Chemical De-coating Process. Metallurgical and Materials Engineering, 29 (4). pp. 33-42.

Arifvianto, Budi and Wirawan, Yuris Bahadur and Salim, Urip Agus and Suyitno, Suyitno and Mahardika, Muslim (2021) Effects of extruder temperatures and raster orientations on mechanical properties of the FFF-processed polylactic-acid (PLA) material. RAPID PROTOTYPING JOURNAL, 27 (10). pp. 1761-1775. ISSN 1355-2546

Ariyadi, Hifni Mukhtar and Jeong, Jongsoo and Saito, Kiyoshi (2022) Computational analysis of hydrogen flow and aerodynamic noise emission in a solenoid valve during fast-charging to fuel cell automobiles. JOURNAL OF ENERGY STORAGE, 45. ISSN 2352-152X

Aryaswara, Lugas Gada and Sentanuhady, Jayan and Hajad, Makbul and Muflikhun, Muhammad Akhsin (2023) Scientometric Analysis and Systematic Study of Nanomaterial Synthesized via CVD, Sol-Gel, and VPG Methods: A Big Data Clustering Perspective. Journal of Engineering Science and Technology Review, 16 (1). pp. 1-9. ISSN 17912377

Astyanto, Achilleus Hermawan and Nugroho, Akhlisa Nadiantya Aji and Indarto, Indarto and Gusti Ngurah Bagus Catrawedarma, I. and Lucas, Dirk and Deendarlianto, Deendarlianto (2023) Statistical characterization of the interfacial behavior captured by a novel image processing algorithm during the gas/liquid counter-current two-phase flow in a 1/3 scaled down of PWR hot leg. Nuclear Engineering and Design, 404: 112179. pp. 1-18. ISSN 00295493

Bahiuddin, Irfan and Imaduddin, Fitrian and Mazlan, Saiful Amri and Ariff, Mohd. H.M. and Mohmad, Khairunnisa Bte and Ubaidillah, Ubaidillah and Choi, Seung-Bok (2021) Accurate and fast estimation for field-dependent nonlinear damping force of meandering valve-based magnetorheological damper using extreme learning machine method. Sensors and Actuators, A: Physical, 318. ISSN 09244247

Bahiuddin, Irfan and Imaduddin, Fitrian and Mazlan, Saiful Amri and Shapiai, Mohd Ibrahim and Ubaidillah, Ubaidillah and Nazmi, Nurhazimah and Mohamad, Norzilawati (2021) A machine learning approach to estimate magnetorheological suspension composition based on magnetic field dependent-rheological properties. Smart Materials and Structures, 30 (10). ISSN 09641726

Bahiuddin, Irfan and Mazlan, Saiful Amri and Imaduddin, Fitrian and Yamasaki, Nobuhiko and Ubaidillah, Ubaidillah (2021) A Transient Model of a Variable Geometry Turbocharger Turbine Using a Passive Actuator. Arabian Journal for Science and Engineering, 46 (3). 2565 – 2577. ISSN 2193567X

Bahiuddin, Irfan and Wibowo, Setyawan Bekti and Syairaji, M. and Putra, Jimmy Trio and Pandito, Cahyo Adi and Maulana, Ahdiar Fikri and Prastica, Rian Mantasa Salve and Nazmi, Nurhazimah (2021) A systematic approach to predict the behavior of cough droplets using feedforward neural networks method. Fluids, 6 (2). ISSN 23115521

Budiyantoro, Cahyo and Rochardjo, Heru S. B. and Nugroho, Gesang (2021) Design, Manufacture, and Performance Testing of Extrusion-Pultrusion Machine for Fiber-Reinforced Thermoplastic Pellet Production. MACHINES, 9 (2).

Budiyantoro, Cahyo and Rochardjo, Heru S. B. and Nugroho, Gesang (2021) Design, manufacture, and performance testing of extrusion–pultrusion machine for fiber-reinforced thermoplastic pellet production. Machines, 9 (2). 1 – 17. ISSN 20751702

Budiyantoro, Cahyo and Rochardjo, Heru S. B. and Nugroho, Gesang (2021) Overmolding of Hybrid Long and Short Carbon Fiber Polypropylene Composite: Optimizing Processing Parameters. JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING, 5 (4).

Budiyantoro, Cahyo and Rochardjo, Heru S. B. and Nugroho, Gesang (2021) Overmolding of hybrid long and short carbon fiber polypropylene composite: Optimizing processing parameters. Journal of Manufacturing and Materials Processing, 5 (4). ISSN 25044494

Catrawedarma, I. G. N. B. and Deendarlianto, Deendarlianto and Indarto, Indarto (2022) Hydrodynamic behaviors of air-water two-phase flow during the water lifting in a bubble generator type of airlift pump system. HEAT AND MASS TRANSFER, 58 (6). pp. 1005-1026. ISSN 0947-7411

Catrawedarma, I. G. N. B. and Resnaraditya, Fadliqa Aghid and Deendarlianto, Deendarlianto and Indarto, Indarto (2021) Statistical characterization of the flow structure of air-water-solid particles three-phase flow in the airlift pump-bubble generator system. FLOW MEASUREMENT AND INSTRUMENTATION, 82. ISSN 0955-5986

Catrawedarma, I.G.N.B. and Deendarlianto, Deendarlianto and Indarto, Indarto (2021) The performance of airlift pump for the solid particles lifting during the transportation of gas-liquid-solid three-phase flow: A comprehensive research review. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 235 (2). 606 – 628. ISSN 09544089

Catrawedarma, IGNB. and Deendarlianto, Deendarlianto and Indarto, Indarto (2021) Statistical Characterization of Flow Structure of Air-water Two-phase Flow in Airlift Pump-Bubble Generator System. INTERNATIONAL JOURNAL OF MULTIPHASE FLOW, 138. ISSN 0301-9322

Catrawedarma, IGNB. and Deendarlianto, Deendarlianto and Indarto, Indarto (2021) Statistical Characterization of Flow Structure of Air–water Two-phase Flow in Airlift Pump–Bubble Generator System. International Journal of Multiphase Flow, 138. ISSN 03019322

Damayanti, Retno and Hartono, Budi and Wijaya, Andi (2021) Complexity, leadership, and megaproject performance: a configuration analysis. Journal of Industrial Engineering and Management, 14 (3). 570 – 603. ISSN 20138423

Damayanti, Retno Wulan and Hartono, Budi and Wijaya, Andi Rahadiyan (2021) Project Managers' Perspectives on the Complexity of Construction Megaproject in Indonesia: A Multicase Study. IEEE Engineering Management Review, 49 (2). 153 – 171. ISSN 03608581

Darmawan, Agus and Sheu, D. Daniel (2021) Preventive maintenance scheduling: a simulation-optimization approach. Production and Manufacturing Research, 9 (1). 281 – 298. ISSN 21693277

Darmawan, Agus and Sheu, D. Daniel (2021) Preventive maintenance scheduling: a simulation-optimization approach. PRODUCTION AND MANUFACTURING RESEARCH-AN OPEN ACCESS JOURNAL, 9 (1). pp. 281-298.

Darmawan, Agus and Wong, Hartanto and Thorstenson, Anders (2021) Supply chain network design with coordinated inventory control. Transportation Research Part E: Logistics and Transportation Review, 145. ISSN 13665545

Deendarlianto, Deendarlianto and Pradecta, Muhammad Reza and Prakoso, Tirto and Indarto, Indarto and Mitrakusuma, Windy H. and Widyaparaga, Adhika (2021) Contact angle dynamics during the impact of single water droplet onto a hot flat practical stainless steel surface under medium Weber numbers. HEAT AND MASS TRANSFER, 57 (7). pp. 1097-1106. ISSN 0947-7411

Dharmawan, Agus and Masithoh, Rudiati Evi and Amanah, Hanim Zuhrotul (2023) Development of PCA-MLP Model Based on Visible and Shortwave Near Infrared Spectroscopy for Authenticating Arabica Coffee Origins. Foods, 12 (11). pp. 1-19. ISSN 2304-8158

Effendi, M. Khoirul and Soepangkat, Bobby O. P. and Harnany, Dinny and Norcahyo, Rachmadi (2023) Multi-performance Optimization in End Milling of GFRP Composites Using Backpropagation Neural Network and Differential Evolution Algorithm. Lecture Notes in Mechanical Engineering. pp. 325-333. ISSN 21954364

Effendi, M. Khoirul and Soepangkat, Bobby O. P. and Norcahyo, Rachmadi and Suhardjono, Suhardjono and Sampurno, Sampurno (2021) Cutting Force And Surface Roughness Optimizations In End Milling Of Gfrp Composites Utilizing Bpnn-Firefly Method. International Journal of Integrated Engineering, 13 (5). 297 – 306. ISSN 2229838X

Fauzun, Fauzun and Yogiswara, Cahyo Wibi (2021) The effect of bellmouth radius and venturi restrictor length on the power and torque of BM-9's engine. Evergreen, 8 (2). 477 – 483. ISSN 21890420

Harnany, Dinny and Effendi, M. Khoirul and Kis Agustin, H. C. and Soepangkat, Bobby O.P. and Sampurno, Sampurno and Norcahyo, Rachmadi (2023) Multi-objective Optimization Using Backpropagation Neural Network and Teaching–Learning-Based-Optimization Method in Surface Grinding Under Dry and Minimum Quantity Lubrication Conditions (MQL). Lecture Notes in Mechanical Engineering. pp. 334-342. ISSN 21954364

Hartono, Budi and Ghifari, M. Dzaki Agung and Dianita, Orchida (2021) Risk Allocation Preferences in Indonesian Electricity Public-Private Partnership Projects: A Conjoint Analysis. IEEE Engineering Management Review, 49 (3). 154 – 174. ISSN 03608581

Hartono, Budi and Tantina, Indira and Wibowo, Budhi Sholeh (2021) EXPLORING SUCCESSFUL CAMPAIGN PROFILES ON CROWDFUNDING-BASED PROJECT FINANCING: A TREE-BASED COMPARATIVE ANALYSIS. INTERNATIONAL JOURNAL OF INNOVATION MANAGEMENT, 25 (04). ISSN 1363-9196

Harwati, Harwati and Sri Asih, Anna Maria and Sopha, Bertha Maya (2023) Analysis and Prioritizing Capability in the Halal Resilience Supply Chain: A Fuzzy AHP Approach. International Journal of Industrial Engineering and Production Research, 34 (3). pp. 1-18. ISSN 2345363X

Imani, N.A.C. and Kusumastuti, Y. and Petrus, H.T.B.M. and Timotius, D. and Kobayashi, M. (2021) ENHANCED MECHANICAL PROPERTIES OF ORGANIC-INORGANIC CHITOSAN/NANO SILICA COMPOSITE FILM. Journal of Advanced Manufacturing Technology, 15 (2). 1 – 11. ISSN 19853157

Isharyani, Muriani Emelda and Sopha, Bertha Maya and Tjahjono, Benny and Wibisono, M. Arif (2024) Exploring the Smart Retail Scenario for Traditional Retailers: Case Studies From a Developing Country. IEEE TRANSACTIONS ON ENGINEERING MANAGEMENT, 71. pp. 9325-9341. ISSN 0018-9391

Jalaali, Bahrul and Nasution, Muhammad Ridlo Erdata and Yuana, Kumara Ari and Deendarlianto, Deendarlianto and Dinaryanto, Okto (2021) Investigating the effects of viscosity and density ratio on the numerical analysis of Rayleigh-Taylor instability in two-phase flow using Lattice Boltzmann method: From early stage to equilibrium state. APPLIED MATHEMATICS AND COMPUTATION, 411. ISSN 0096-3003

Jamasri, Jamasri and Rochardjo, H. and Nawangsari, P. and Waskito, A.T. (2021) Friction modifiers optimization on tribological properties of non-asbestos organic (Nao) brake pad by doe-taguchi method. Tribology in Industry, 43 (2). 310 – 320. ISSN 03548996

Jamasri, Jamasri and Yudhanto, Ferriawan (2021) Effect of Addition Microcrystalline Cellulose on Mechanical Properties of Jute/Glass Fibers Hybrid Laminated Composite. International Journal of Automotive Engineering, 12 (1). 1 – 8. ISSN 21850992

Jamasri, Jamasri and Yudhanto, Ferriawan and Yudha, Venditias and Syafri, Edi (2023) Mechanical, Physical and Thermal Characterization of PVA (Polyvinyl Alcohol)/Chitosan Bioplastic Film. International Journal of Heat and Technology, 41 (3). pp. 687-693. ISSN 03928764

Karuana, Feri and Prismantoko, Adi and Suhendra, Nandang and Darmawan, Arif and Hariana, Hariana and Darmadi, Djarot B. and Muflikhun, Muhammad Akhsin (2023) Investigation of austenitic stainless steel corrosion resistance against ash deposits from co-combustion coal and biomass waste. Engineering Failure Analysis, 150. ISSN 13506307

Karuana, Feri and Prismantoko, Adi and Suhendra, Nandang and Darmawan, Arif and Hariana, Hariana and Darmadi, Djarot B. and Muflikhun, Muhammad Akhsin (2023) Investigation of austenitic stainless steel corrosion resistance against ash deposits from co-combustion coal and biomass waste. ENGINEERING FAILURE ANALYSIS, 150: 107368. pp. 1-17. ISSN 1350-6307

Khasanah, Rahayu and Jamasri, Jamasri and Yuniarto, Hari Agung and Setiawan, Noor Akhmad (2021) Turnaround Maintenance Assessment in Process Industry in Indonesia: A Case Study. International Journal of Performability Engineering, 17 (10). 858 – 865. ISSN 09731318

Khasani, Khasani and Deendarlianto, Deendarlianto and Itoi, Ryuichi (2021) Numerical study of the effects of CO<sub>2</sub> gas in geothermal water on the fluid-flow characteristics in production wells. ENGINEERING APPLICATIONS OF COMPUTATIONAL FLUID MECHANICS, 15 (1). pp. 111-129. ISSN 1994-2060

Khasani, Khasani and Prasidha, Willie and Widyatama, Arif and Aziz, Muhammad (2021) Energy-saving and environmentally-benign integrated ammonia production system. Energy, 235. ISSN 03605442

Khasani, Khasani and Prasidha, Willie and Widyatama, Arif and Aziz, Muhammad (2021) Energy-saving and environmentally-benign integrated ammonia production system. ENERGY, 235. ISSN 0360-5442

Kuo, R. J. and Lu, Shih-Hao and Lai, Pei-Yu and Mara, Setyo Tri Windras (2022) Vehicle routing problem with drones considering time windows. EXPERT SYSTEMS WITH APPLICATIONS, 191. ISSN 0957-4174

Kuo, R. J. and Luthfiansyah, Muhammad Fernanda and Masruroh, Nur Aini and Zulvia, Ferani Eva (2023) Application of improved multi-objective particle swarm optimization algorithm to solve disruption for the two-stage vehicle routing problem with time windows. Expert Systems with Applications, 225. ISSN 09574174

Kusmono, Kusmono and Bora, C. and Salim, U. A. (2021) Effects of Cold Rolling and Annealing Time on Fatigue Resistance of AA5052 Aluminum Alloy. INTERNATIONAL JOURNAL OF ENGINEERING, 34 (9). pp. 2189-2197. ISSN 1025-2495

Kusmono, Kusmono and Wildan, Muhammad Waziz and Lubis, Fadhlan Ihsan (2021) Fabrication and Characterization of Chitosan/Cellulose Nanocrystal/Glycerol Bio-Composite Films. POLYMERS, 13 (7).

Kusumaningsih, Haslinda and Deendarlianto, Deendarlianto and Indarto, Indarto and Alfath, Muhammad Fakhri and Madani, M. Rian Alif and Ritonga, Aldy Franstanata (2023) Fourier and Wavelet Analysis of Pressure Fluctuations in Gas-Non-Newtonian Liquid Two-Phase Flows in a Microchannel. Multiphase Science and Technology, 35 (3). pp. 67-80. ISSN 0276-1459

Ma'a, Mustaza and Pranoto, Indro and Kamal, Samsul (2023) Enhanced Heat Transfer Mechanisms in a Horizontal Annular Heat Exchanger Utilizing a Central Tubular Heater. International Journal of Heat and Technology, 41 (5). pp. 1327-1334.

Mahardika, Muslim and Setyawan, Martin Andre and Sriani, Tutik and Miki, Norihisa and Prihandana, Gunawan Setia (2021) Electropolishing Parametric Optimization of Surface Quality for the Fabrication of a Titanium Microchannel Using the Taguchi Method. MACHINES, 9 (12).

Malau, Viktor and Hakiki, Wisnu (2021) Chromate and molybdate inhibitors effects on corrosion charateristic of api 5l grade b in a brine water solution containing 8 nacl. Key Engineering Materials, 892 KE. 115 – 123. ISSN 10139826

Maliwemu, Erich Umbu Kondi and Malau, Viktor and Iswanto, Priyo Tri and Kambali, Imam and Sujitno, Tjipto and Suprapto, Suprapto (2021) Corrosion fatigue crack propagation of aisi 316l by nitrogen ion implantation in simulated body fluid. Metalurgija, 60 (1-2). 43 – 46. ISSN 05435846

Mara, Setyo Tri Windras and Kuo, R. J. and Asih, Anna Maria Sri (2021) Location-routing problem: a classification of recent research. INTERNATIONAL TRANSACTIONS IN OPERATIONAL RESEARCH, 28 (6). pp. 2941-2983. ISSN 0969-6016

Mara, Setyo Tri Windras and Rifai, Achmad Pratama and Norcahyo, Rachmadi (2023) On Different Formulations for the Multiperiod Vehicle Routing Problem With Simultaneous Pickup and Delivery. ASEAN Engineering Journal, 13 (1). pp. 27-39. ISSN 25869159

Mara, Setyo Tri Windras and Sutoyo, Edi and Norcahyo, Rachmadi and Rifai, Achmad Pratama (2023) The job sequencing and tool switching problem with sequence-dependent set-up time. Journal of King Saud University - Engineering Sciences, 35 (1). pp. 53-61. ISSN 10183639

Markumningsih, Sri and Hwang, Seok-Joon and Kim, Jeong-Hun and Jang, Moon-Kyeong and Nam, Ju-Seok (2023) Stress Simulation on Cam-Type Transplanting Device of Semiautomatic Vegetable Transplanter. Agriculture (Switzerland), 13 (12). pp. 1-13. ISSN 2077-0472

Minaminosono, Ayato and Ohsugi, Yonusuke and Yamaguchi, Yuya and Wiranata, Ardi and Sawada, Hikaru and Hosoya, Naoki and Maeda, Shingo (2023) Pre-Strain Method for Stretchable Strain Sensors With Linear Sensitivity Using Acrylic Elastomer and CNTs Powder. IEEE Access, 11. pp. 125790-125799.

Mohmad, Azlan and Ariff, Mohd Hatta Mohammed and Shapiai, Mohd Ibrahim and Shamsudin, Mohd Solehin and Zakaria, Norulhakima and Sujan, Mohammad Adnan and Ghani, Rasli and Bahiuddin, Ifran (2024) Investigation of the Influence of Non-Routine and Derived Features in the Development of Early Detection Model for Transformer Health Index Classification. Journal of Advanced Research in Applied Sciences and Engineering Technology, 39 (2). 141 -152. ISSN 24621943

Muflikhun, Muhammad Akhsin and Adyudya, Mayradaffa and Rahman, Nur Fatah and Sentanuhady, Jayan and Raghu, Swathi Naidu Vakamulla (2023) Comprehensive analysis and economic study of railway brake failure from metal-based and composites-based materials. Forces in Mechanics, 12: 100223. pp. 1-13. ISSN 26663597

Muflikhun, Muhammad Akhsin and Sentanu, Divlan Audie (2021) Characteristics and performance of carabiner remodeling using 3D printing with graded filler and different orientation methods. Engineering Failure Analysis, 130. ISSN 13506307

Muflikhun, Muhammad Akhsin and Yokozeki, Tomohiro (2021) Experimental and numerical analysis of CFRP-SPCC hybrid laminates for automotive and structural applications with cost analysis assessment. Composite Structures, 263. ISSN 02638223

Muflikhun, Muhammad Akhsin and Yokozeki, Tomohiro (2021) Experimental and numerical analysis of CFRP-SPCC hybrid laminates for automotive and structural applications with cost analysis assessment. COMPOSITE STRUCTURES, 263. ISSN 0263-8223

Muflikhun, Muhammad Akhsin and Yokozeki, Tomohiro (2021) Steel plate cold commercial - carbon fiber reinforced plastics hybrid laminates for automotive applications: curing perspective with thermal residual effect. JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 14. pp. 2700-2714. ISSN 2238-7854

Muflikhun, Muhammad Akhsin and Yokozeki, Tomohiro (2023) Systematic analysis of fractured specimens of composite laminates: Different perspectives between tensile, flexural, Mode I, and Mode II test. International Journal of Lightweight Materials and Manufacture, 6 (3). pp. 329-343. ISSN 25888404

Muhayat, Nurul and Putri, Ericha Dwi Wahyu Syah and Hendrato, Hendrato and Depari, Yohanes Pringeten Dilianto Sembiring and Puspitasari, Poppy and Jamasri, Jamasri and Prabowo, Aditya Rio and Triyono, Triyono (2023) Apparatus Design of One-Step Double-Side Friction Stir Welding for Aluminum Plates. Designs, 7 (3). pp. 1-19. ISSN 24119660

Muhibbuddin, Muhibbudin and Zaki, Muhammad and Kamal, Samsul and Prayitni, Prayitni and Erdiwansyah, Erdiwansyah and Darmo, Suryo and Mahidin, Mahidin (2021) Analysis the Performance for Runner Pelton Turbine by Using Bamboo Material. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 79 (2). 139 – 148. ISSN 22897879

Mulyani, Yun Prihantina and Saifurrahman, Anas and Arini, Hilya Mudrika and Rizqiawan, Arwindra and Hartono, Budi and Utomo, Dhanan Sarwo and Spanellis, Agnessa and Beltran, Macarena and Banjar Nahor, Kevin Marojahan and Paramita, Dhyana and Harefa, Wira Dranata (2024) Analyzing public discourse on photovoltaic (PV) adoption in Indonesia: A topic-based sentiment analysis of news articles and social media. Journal of Cleaner Production, 434: 140233. ISSN 09596526

Murakami, Taichi and Kuwajima, Yu and Wiranata, Ardi and Minaminosono, Ayato and Shigemune, Hiroki and Mao, Zebing and Maeda, Shingo (2021) A DIY Fabrication Approach for Ultra-Thin Focus-Tunable Liquid Lens Using Electrohydrodynamic Pump. MICROMACHINES, 12 (12).

Murakami, Taichi and Kuwajima, Yu and Wiranata, Ardi and Minaminosono, Ayato and Shigemune, Hiroki and Mao, Zebing and Maeda, Shingo (2021) A diy fabrication approach for ultra‐thin focus‐tunable liquid lens using electrohydrodynamic pump. Micromachines, 12 (12). ISSN 2072666X

Murti, Prastowo and Shoji, Eita and Biwa, Tetsushi (2023) Analysis of multi-cylinder type liquid piston Stirling cooler. Applied Thermal Engineering, 219: 119403. pp. 1-10. ISSN 13594311

Murti, Prastowo and Takizawa, Akira and Shoji, Eita and Biwa, Tetsushi (2022) Design guideline for multi-cylinder-type liquid-piston Stirling engine. APPLIED THERMAL ENGINEERING, 200. ISSN 1359-4311

Nugraha, Ariyana Dwiputra and Fajrin, Muhamad Kevin and Malik, Zeeshan Hamid and Sentanuhady, Jayan and Kusni, Muhammad and Darmanto, Seno and Sutanto, Benny and Nugroho, Gesang and Muflikhun, Muhammad Akhsin (2023) Tilt Angle Optimization of Steam Turbine Blade Model Based on Aluminium: The Multi-Simulation Perspective. Journal of Engineering Science and Technology Review, 16 (4). pp. 188-195. ISSN 17912377

Nugraha, Ariyana Dwiputra and Harianto, Harianto and Muflikhun, Muhammad Akhsin (2023) Failure in power plant system related to mitigations and economic analysis; A study case from steam power plant in Suralaya, Indonesia. Results in Engineering, 17: 101004. pp. 1-11. ISSN 25901230

Nugraha, Ariyana Dwiputra and Harianto, Harianto and Muflikhun, Muhammad Akhsin (2023) Failure in power plant system related to mitigations and economic analysis; A study case from steam power plant in Suralaya, Indonesia. RESULTS IN ENGINEERING, 17. pp. 1-11. ISSN 2590-1230

Nugroho, Rizki Susetyo and Bahiuddin, Irfan and Prabakara, Hafizh Arsa and Chazim, Ryandhi Rofifu and Leman, Zulkarnain Ali and Ariff, Mohd Hatta Mohammed (2023) A dynamic modelling of forklift hydraulic actuator internal leakage using bond graph method. International Journal of Heavy Vehicle Systems, 30 (3). pp. 380-399. ISSN 17415152

Nugroho, Rizki Susetyo and Bahiuddin, Irfan and Prabakara, Hafizh Arsa and Chazim, Ryandhi Rofifu and Leman, Zulkarnain Ali and Ariff, Mohd Hatta Mohammed (2023) A dynamic modelling of forklift hydraulic actuator internal leakage using bond graph method. INTERNATIONAL JOURNAL OF HEAVY VEHICLE SYSTEMS, 30 (3). pp. 380-399. ISSN 1744-232X

Nugroho, Rizki Susetyo and Bahiuddin, Irfan and Prabakara, Hafizh Arsa and Chazim, Ryandhi Rofifu and Leman, Zulkarnain Ali and Ariff, Mohd Hatta Mohammed (2023) A dynamic modelling of forklift hydraulic actuator internal leakage using bond graph method. International Journal of Heavy Vehicle Systems, 30 (3). 380 – 399. ISSN 1744232X

Nurbaiti, N. and Tontowi, A. E. and Widyastuti, M. G. and Hoten, H. V. and Ibrahim, F. and Muna, N. and Febrian, R. and Perkasa, D. P. and Herliansyah, M. K. (2023) Process Parameter Optimization of 3D-Printer Machine Using Response Surface Method for Printing Hydroxyapatite/Collagen Composite Slurry. International Journal of Engineering Transactions C: Aspects, 36 (11). pp. 1961-1971. ISSN 24237167

Nurwidiana, Nurwidiana and Sopha, Bertha Maya and Widyaparaga, Adhika (2021) Modelling photovoltaic system adoption for households: A systematic literature review. Evergreen, 8 (1). 69 – 81. ISSN 21890420

Pamuji, Feby Agung and Dhiaulhaq, Muhammad Zufar and Wibowo, Rony Seto and Faurahmansyah, Mohamad Angga and Suwito, Suwito and Iskandar, Eka and Effendi, Mohammad Khoirul and Sudarmanta, Bambang and Syafi’i, Brilliant Alfan and Arumsari, Nurvita and Fauzun, Fauzun (2023) Energy Management System Design for Hybrid and Intelligent Light Train. Przegl\cd Elektrotechniczny, 1 (8). pp. 82-88. ISSN 0033-2097

Perkasa, Sigit Dani and Megantoro, Prisma and Winarno, Hendra Ari (2021) Implementation of a camera sensor pixy 2 cmucam5 to a two wheeled robot to follow colored object. Journal of Robotics and Control (JRC), 2 (6). 496 – 501. ISSN 27155056

Pranoto, Indro and Rahman, Muhammad Aulia and Wicaksana, Cahya Dhika and Wibisono, Alan Eksi and Fauzun, Fauzun and Widyatama, Arif (2023) Flow Boiling Heat Transfer Performance and Boiling Phenomena on Various Straight Fin Configurations. Fluids, 8 (3). pp. 1-14. ISSN 23115521

Prihandana, Gunawan Setia and Sururi, Ahmad and Sriani, Tutik and Yusof, Farazila and Jamaludin, Mohd Fadzil and Mahardika, Muslim (2022) Facile fabrication of low-cost activated carbon bonded polyethersulfone membrane for efficient bacteria and turbidity removal. WATER PRACTICE AND TECHNOLOGY, 17 (1). pp. 102-111.

Pujiyulianto, E. and Suyitno, Suyitno and Rajagukguk, K. and Arifvianto, B. and Katgerman, L. and Paundra, F. and Yudistira, H. T. and Nurullah, F. P. and Muhyi, A. and Arif, M. F. (2023) Effect of chemical composition on hot cracking susceptibility (HCS) using various hot cracking criteria. Engineering Failure Analysis, 152: 107501. pp. 1-13. ISSN 13506307

Pujiyulianto, Eko and Suyitno, Suyitno (2021) Effect of pulse current in manufacturing of cardiovascular stent using EDM die-sinking. International Journal of Advanced Manufacturing Technology, 112 (11-12). 3031 – 3039. ISSN 02683768

Pujiyulianto, Eko and Suyitno, Suyitno (2021) Effect of pulse current in manufacturing of cardiovascular stent using EDM die-sinking. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 112 (11-12). pp. 3031-3039. ISSN 0268-3768

Rahman, Arif and Putra, Juno Dwi and Prihantini, Nining Betawati and Mahlia, T. M. and Aziz, M. and Deendarlianto, Deendarlianto and Nasruddin, N. (2021) Cultivation of <i>Synechococcus</i> HS-9 in a novel rectangular bubble column photobioreactor with horizontal baffle. CASE STUDIES IN THERMAL ENGINEERING, 27. ISSN 2214-157X

Rahman, Arif and Putra, Juno Dwi and Prihantini, Nining Betawati and Mahlia, T.M.I. and Aziz, M. and Deendarlianto, Deendarlianto and Nasruddin, N. (2021) Cultivation of Synechococcus HS-9 in a novel rectangular bubble column photobioreactor with horizontal baffle. Case Studies in Thermal Engineering, 27. ISSN 2214157X

Rasid, Md Mamunur and Kimura, Masato and Murshed, Md Masum and Wijayanti, Erny Rahayu and Notsu, Hirofumi (2023) A Two-Step Lagrange–Galerkin Scheme for the Shallow Water Equations with a Transmission Boundary Condition and Its Application to the Bay of Bengal Region—Part I: Flat Bottom Topography. Mathematics, 11 (7). pp. 1-25. ISSN 22277390

Redi, Anak Agung Ngurah Perwira and Sopha, Bertha Maya and Asih, Anna Maria Sri and Liperda, Rahmad Inca (2021) Collaborative hybrid aerial and ground vehicle routing for post-disaster assessment. Sustainability (Switzerland), 13 (22). ISSN 20711050

Rifai, Achmad Pratama and Kusumastuti, Putri Adriani and Mara, Setyo Tri Windras and Norcahy, Rachmadi and Dawal, Siti Zawiah (2021) Multi-operator hybrid genetic algorithm-simulated annealing for reentrant permutation flow-shop scheduling. ASEAN Engineering Journal, 11 (3). 109 – 126. ISSN 25869159

Rifai, Achmad Pratama and Kusumastuti, Putri Adriani and Mara, Setyo Tri Windras and Norcahy, Rachmadi and Dawal, Siti Zawiah (2021) Multi-operator hybrid genetic algorithm-simulated annealing for reentrant permutation flow-shop scheduling. ASEAN Engineering Journal, 11 (3). 109 – 126. ISSN 25869159

Rifai, Achmad Pratama and Mara, Setyo Tri Windras and Ridho, Hafidz and Norcahyo, Rachmadi (2022) The double row layout problem with safety consideration: a two-stage variable neighborhood search approach. JOURNAL OF INDUSTRIAL AND PRODUCTION ENGINEERING, 39 (3). pp. 181-195. ISSN 2168-1015

Rifai, Achmad Pratama and Mara, Setyo Tri Windras and Sudiarso, Andi (2021) Multi-objective distributed reentrant permutation flow shop scheduling with sequence-dependent setup time. EXPERT SYSTEMS WITH APPLICATIONS, 183. ISSN 0957-4174

Rifai, Achmad Pratama and Sutoyo, Edi and Mara, Setyo Tri Windras and Dawal, Siti Zawiah Md (2023) Multiobjective Sequence-Dependent Job Sequencing and Tool Switching Problem. IEEE Systems Journal, 17 (1). pp. 1-12. ISSN 19379234

Rizaldi, M.I. and Rahman, Arif and Prihantini, N.B. and Deendarlianto, Deendarlianto and Nasruddin, Nasruddin (2021) Effect of Bubble Size on the Growth of Synechococcus HS-9 Microalgae with Double Loop Fluid Oscillator. Evergreen, 8 (4). 866 – 871. ISSN 21890420

Rochardjo, Heru S. B. and Budiyantoro, Cahyo (2021) Manufacturing and Analysis of Overmolded Hybrid Fiber Polyamide 6 Composite. POLYMERS, 13 (21).

Rochardjo, Heru S. B. and Fatkhurrohman, Fatkhurrohman and Kusumaatmaja, Ahmad and Yudhanto, Ferriawan (2021) Fabrication of Nanofiltration Membrane based on Polyvinyl Alcohol Nanofibers Reinforced with Cellulose Nanocrystal using Electrospinning Techniques. INTERNATIONAL JOURNAL OF TECHNOLOGY, 12 (2). pp. 329-338. ISSN 2086-9614

Rochardjo, Heru S.B and Fatkhurrohman, Fatkhurrohman and Kusumaatmaja, Ahmad and Yudhanto, Ferriawan (2021) Fabrication of Nanofiltration Membrane based on Polyvinyl Alcohol Nanofibers Reinforced with Cellulose Nanocrystal using Electrospinning Techniques. International Journal of Technology, 12 (2). 329 – 338. ISSN 20869614

Rochardjo, Heru Santoso Budi and Budiyantoro, Cahyo and Utomo, Rohadi Satrio Budi and Yudhanto, Ferriawan (2023) Manufacturing and Analysis of Mechanical Properties of Overmolded Hybrid Carbon Fiber Reinforced Polypropylene - Glass Fiber Reinforced Polyamide 6. International Review of Mechanical Engineering (IREME), 17 (5). p. 226. ISSN 1970-8734

Saharuddin, K.D. and Ariff, M.H.M. and Mohmad, K. and Bahiuddin, I. and Ubaidillah, Ubaidillah and Mazlan, S.A. and Nazmi, N. and Fatah, A.Y.A. (2021) Prediction Model of Magnetorheological (MR) Fluid Damper Hysteresis Loop using Extreme Learning Machine Algorithm. Open Engineering, 11 (1). 584 – 591. ISSN 23915439

Sakti, Sekar and Zhang, Lele and Thompson, Russell G. (2023) Synchronization in synchromodality. Transportation Research Part E: Logistics and Transportation Review, 179. ISSN 13665545

Sakti, Sekar and Zhang, Lele and Thompson, Russell G. (2023) Synchronization in synchromodality. TRANSPORTATION RESEARCH PART E-LOGISTICS AND TRANSPORTATION REVIEW, 179. ISSN 1366-5545

Santoso, H. B. and Baroroh, D. K. and Darmawan, A. (2021) FUTURE APPLICATION OF MULTISENSORY MIXED REALITY IN THE HUMAN CYBER-PHYSICAL SYSTEM. SOUTH AFRICAN JOURNAL OF INDUSTRIAL ENGINEERING, 32 (4). pp. 44-56. ISSN 2224-7890

Santoso, H.B. and Baroroh, D.K. and Darmawan, A. (2021) FUTURE APPLICATION OF MULTISENSORY MIXED REALITY IN THE HUMAN CYBER—PHYSICAL SYSTEM. South African Journal of Industrial Engineering, 32 (4). 44 – 56. ISSN 1012277X

Santoso, Nugroho and Suharnadi, Bambang and Prayoga, Benidiktus Tulung and Setyana, Lilik Dwi (2021) CHARACTERISTIC OF INTERFACE BIMETAL ALUMINUM-COPPER FOR BI-METAL BUSHING PRODUCED BY CENTRIFUGAL CASTING. ACTA METALLURGICA SLOVACA, 27 (1). pp. 28-31. ISSN 1335-1532

Santoso, Nugroho and Suharnadi, Bambang and Prayoga, Benidiktus Tulung and Setyana, Lilik Dwi (2021) Characteristic of interface bimetal aluminum-copper for bimetal bushing produced by centrifugal casting. Acta Metallurgica Slovaca, 27 (1). 28 – 31. ISSN 13351532

Sari, Diana Puspita and Masruroh, Nur Aini and Asih, Anna Maria Sri (2021) Consumer Intention to Participate in E-Waste Collection Programs: A Study of Smartphone Waste in Indonesia. SUSTAINABILITY, 13 (5).

Sari, Diana Puspita and Masruroh, Nur Aini and Asih, Anna Maria Sri (2021) Consumer intention to participate in e‐waste collection programs: A study of smartphone waste in Indonesia. Sustainability (Switzerland), 13 (5). 1 – 28. ISSN 20711050

Sari, Diana Puspita and Masruroh, Nur Aini and Asih, Anna Maria Sri (2021) Consumer intention to participate in e‐waste collection programs: A study of smartphone waste in Indonesia. Sustainability (Switzerland), 13 (5). 1 – 28. ISSN 20711050

Sari, Diana Puspita and Masruroh, Nur Aini and Asih, Anna Maria Sri (2023) Eco-Efficiency Comparative Analysis of Informal and Formal Smartphone Recycling Practices Using Life Cycle Assessment. International Journal on Advanced Science, Engineering and Information Technology, 13 (3). pp. 1108-1117. ISSN 24606952

Sari, Diana Puspita and Masruroh, Nur Aini and Asih, Anna Maria Sri (2021) Extended Maximal Covering Location and Vehicle Routing Problems in Designing Smartphone Waste Collection Channels: A Case Study of Yogyakarta Province, Indonesia. SUSTAINABILITY, 13 (16).

Sari, Diana Puspita and Masruroh, Nur Aini and Asih, Anna Maria Sri (2021) Extended maximal covering location and vehicle routing problems in designing smartphone waste collection channels: A case study of Yogyakarta Province, Indonesia. Sustainability (Switzerland), 13 (16). ISSN 20711050

Sari, Marti Widya and Herianto, Herianto and Dharma, Igb G.B.B. and Tontowi, Alva Edy (2023) Social Manufacturing on Integrated Production System: A Systematic Literature Review. Management Systems in Production Engineering, 31 (1). pp. 18-26. ISSN 24505781

Sasmito, Agus and Ilman, Mochammad Noer and Iswanto, Priyo Tri (2023) Effects of rotational speed on the mechanical properties and performance of AA6061-T6 aluminium alloy in similar rotary friction welding. Welding International, 37 (9). pp. 519-530. ISSN 17542138

Sentanu, Divlan Audie and Muflikhun, Muhammad Akhsin (2023) Characteristics of triangle in triangulated cylindrical origami with axial load test for space deployable structures. Journal of Mechanical Science and Technology, 37 (11). pp. 5957-5964.

Sentanuhady, Jayan and Atmaja, Gusti Putu Surya Govinda and Muflikhun, Muhammad Akhsin (2021) Challenges of Biofuel Applications in Industrial and Automotive: A Review. Journal of Engineering Science and Technology Review, 14 (4). 119 – 134. ISSN 17919320

Sentanuhady, Jayan and Robby, Muhamad Inda and Santoso, Santoso and Rahman, Nur Fatah and Muflikhun, Muhammad Akhsin (2023) Degradation of Quality and Contaminants in Lubricants of Diesel Engine Fueled By B100 of Train Power Generator in Long-Term Operation. International Journal of Energy for a Clean Environment, 24 (5). pp. 1-9. ISSN 2150363X

Setiawan, Indra Chandra and Indarto, Indarto and Deendarlianto, Deendarlianto (2021) Quantitative analysis of automobile sector in Indonesian automotive roadmap for achieving national oil and CO<sub>2</sub> emission reduction targets by 2030. ENERGY POLICY, 150. ISSN 0301-4215

Setiawan, Joni and Sudiarso, Andi and Winursito, Isananto and Herliansyah, Muhammad Kusumawan (2023) Selection of Material and Manufacturing Technology for Batik Canting Stamps Based on Multi-Criteria Decision-Making Methods. Journal of Engineering and Technological Sciences, 55 (4). pp. 434-452.

Setiawan, Widia and Pasaribu, Bernado and Thoha, Muhammad Badarudin and Pudja, Gusti Ketut and Santoso, Nugroho and Jati, Isworo (2021) DISIMILLAR LAP JOINT FRICTION STIR WELDING (FSW) USING VARIED LENGTH OF PIN. MM Science Journal, 2021-D. 5340 – 5345. ISSN 18031269

Setyawan, Martin A. and Mahardika, Muslim and Sriani, Tutik and Miki, Norihisa and Prihandana, Gunawan S. (2021) Precision electropolishing on fabricating ss 316l microchannel – a taguchi approach. International Journal on Engineering Applications, 9 (4). 209 – 216. ISSN 22812881

Slamet, S. and Suyitno, S. and Kusumaningtyas, I. and Miasa, I.M. (2021) Effect of high-tin bronze composition on physical, mechanical, and acoustic properties of gamelan materials. Archives of Foundry Engineering, 21 (1). 137 – 145. ISSN 18973310

Slamet, S. and Suyitno, S. and Kusumaningtyas, I.K. Indraswari (2021) Effect of Post Cast Heat Treatment on Cu20wt.Sn on Microstructure and Mechanical Properties. Archives of Foundry Engineering, 21 (4). 87 – 92. ISSN 18973310

Sopha, Bertha Maya and Asih, Anna Maria Sri and Agriawan, Juhri Iwan (2024) Adopters and non-adopters of drones in humanitarian operations: An empirical evidence from a developing country. Progress in Disaster Science, 21: 100314. ISSN 25900617

Sudarisman, Sudarisman and Haniel, Haniel and Taufik, Angger Kaloka and Tiopan, Muhammad and Himarosa, Rela Adi and Muflikhun, Muhammad Akhsin (2023) Tensile, Compressive, and Flexural Characterization of CFRP Laminates Related to Water Absorption. Journal of Composites Science, 7 (5). pp. 1-15. ISSN 2504477X

Sun, Bo and Zhao, Tong and Kurnianto Prayitno, Yosephus Ardean and Li, Wei and Sun, Pengzhao and Peng, Cong (2021) Optimization of design variables for rotary regenerative thermal oxidizer high-temperature valve (rto -HTV) based on transient dynamics analysis and multi-objective optimization algorithm. AIP Advances, 11 (12). ISSN 21583226

Tasin, Muhammad Asyraf and Aziz, Siti Aishah Abdul and Mazlan, Saiful Amri and Johari, Mohd Aidy Faizal and Nordin, Nur Azmah and Yusuf, Shahir Yasin Mohd and Choi, Seung Bok and Bahiuddin, Irfan (2023) Magnetostriction Enhancement in Midrange Modulus Magnetorheological Elastomers for Sensor Applications. Micromachines, 14 (4). pp. 1-15. ISSN 2072666X

Tasin, Muhammad Asyraf and Aziz, Siti Aishah Abdul and Mazlan, Saiful Amri and Johari, Mohd Aidy Faizal and Nordin, Nur Azmah and Yusuf, Shahir Yasin Mohd and Choi, Seung-Bok and Bahiuddin, Irfan (2023) Magnetostriction Enhancement in Midrange Modulus Magnetorheological Elastomers for Sensor Applications. Micromachines, 14 (4). ISSN 2072666X

Tiwan, Tiwan and Ilman, M. N. and Kusmono, Kusmono and Sehono, Sehono (2023) Microstructure and mechanical performance of dissimilar friction stir spot welded AA2024-O/AA6061-T6 sheets: Effects of tool rotation speed and pin geometry. International Journal of Lightweight Materials and Manufacture, 6 (1). pp. 1-14. ISSN 25888404

Tiwan, Tiwan and Ilman, M. Noer and Kusmono, Kusmono (2021) Microstructure and mechanical properties of friction stir spot welded AA5052-H112 aluminum alloy. HELIYON, 7 (2).

Tiwan, Tiwan and Ilman, M.N. and Kusmono, Kusmono (2021) Effect of pin geometry and tool rotational speed on microstructure and mechanical properties of friction stir spot welded joints in AA2024-O aluminum alloy. International Journal of Engineering, Transactions B: Applications, 34 (8). 1949 – 1960. ISSN 1728144X

Tomihira, Jidai and Shoji, Eita and Biwa, Tetsushi and Murti, Prastowo and Okuhara, Shinya and Takao, Manabu (2024) Experimental study on liquid piston Stirling engine combined with self-rectifying turbine. Journal of the Acoustical Society of America, 156 (2). 792 -799. ISSN 00014966

Trapsilawati, Fitri and Chen, Chun-Hsien and Wickens, Chris D. and Qu, Xingda (2021) Integration of conflict resolution automation and vertical situation display for on-ground air traffic control operations. Journal of Navigation, 74 (3). 619 – 632. ISSN 03734633

Trapsilawati, Fitri and Chen, Chun-Hsien and Wickens, Chris D. and Qu, Xingda (2021) Integration of conflict resolution automation and vertical situation display for on-ground air traffic control operations. Journal of Navigation, 74 (3). 619 – 632. ISSN 03734633

Trapsilawati, Fitri and Chen, Chun-Hsien and Wickens, Chris D. and Qu, Xingda (2021) Integration of conflict resolution automation and vertical situation display for on-ground air traffic control operations. JOURNAL OF NAVIGATION, 74 (3). pp. 619-632. ISSN 0373-4633

Trapsilawati, Fitri and Priatna, Nadhiya Ulhaq and Wijayanto, Titis and Widyanti, Ari and Syafitri, Utami Dyah and Chamidah, Nur (2021) Examining drivers' socio-demographic variables and perceptions towards sanction mechanisms on speeding behaviour on highways: Targeting appropriate prevention. Journal of Navigation, 74 (4). 726 – 737. ISSN 03734633

Trapsilawati, Fitri and Priatna, Nadhiya Ulhaq and Wijayanto, Titis and Widyanti, Ari and Syafitri, Utami Dyah and Chamidah, Nur (2021) Examining drivers' socio-demographic variables and perceptions towards sanction mechanisms on speeding behaviour on highways: targeting appropriate prevention. JOURNAL OF NAVIGATION, 74 (4). pp. 726-737. ISSN 0373-4633

Trapsilawati, Fitri and Wickens, Christopher D. and Herliansyah, Muhammad Kusumawan and Sari, Mifta Priani Fatika and Tissamodie, Gharsina (2022) Why do Controllers Choose the Conflict Resolution Maneuvers that They Do? INTERNATIONAL JOURNAL OF AEROSPACE PSYCHOLOGY, 32 (1). pp. 24-38. ISSN 2472-1832

Tsao, Yu-Chung and Fauziah, Hanifa-Astofa and Vu, Thuy-Linh and Masrurohand, Nur-Aini (2022) OPTIMAL PRICING, ORDERING, AND CREDIT PERIOD POLICIES FOR DETERIORATING PRODUCTS UNDER ORDER-LINKED TRADE CREDIT. JOURNAL OF INDUSTRIAL AND MANAGEMENT OPTIMIZATION, 18 (6). pp. 4151-4182. ISSN 1547-5816

Tsao, Yu-Chung and Setiawati, Mutia and Vu, Thuy Linh and Sudiarso, Andi (2021) Designing a supply chain network under a dynamic discounting-based credit payment program. RAIRO-OPERATIONS RESEARCH, 55 (4). pp. 2545-2565.

Wahyuni, Sari and Riswan, Muhammad and Adrianto, Nanang and Dharmawan, Mahardika Yoga and Tumbelaka, Rivaldo Marsel and Cuana, Rona and Istiqomah, Nurul Imani and Jiananda, Adhistinka and Garcia, Shania and Suharyadi, Edi (2023) Localized surface plasmon resonance properties dependence of green-synthesized Fe3O4/Ag composite nanoparticles on Ag concentration and an electric field for biosensor application. Photonics and Nanostructures - Fundamentals and Applications, 57. ISSN 15694429

Wajdi, Farid and Kusumaningtyas, Indraswari and Wijaya, Andi R. and Tontowi, Alva E. (2021) Improved Mechanical Properties and In-Vitro Degradation of Chitosan-Pristine Graphene Nanocomposites. International Journal of Integrated Engineering, 13 (1). 230 – 239. ISSN 2229838X

Wajdi, Farid and Kusumaningtyas, Indraswari and Wijaya, Andi Rahadiyan and Tontowi, Alva Edy (2021) Graphene synthesis in Obtaining a safe particle size in Blood Circulation System. Research Journal of Pharmacy and Technology, 14 (1). 270 – 274. ISSN 09743618

Wibowo, Budhi and Fransoo, Jan (2021) Joint-optimization of a truck appointment system to alleviate queuing problems in chemical plants. International Journal of Production Research, 59 (13). 3935 – 3950. ISSN 00207543

Wibowo, Budhi S. and Fransoo, Jan C. (2023) Performance analysis of a drop-swap terminal to mitigate truck congestion at chemical sites. Flexible Services and Manufacturing Journal, 35 (2). pp. 416-454. ISSN 19366590

Wibowo, Budhi S. and Prakoso, Yoga J. and Masruroh, Nur Aini (2023) Performance of judgmental - statistical forecast combination strategies under product-market configurations. International Journal of Management Science and Engineering Management, 18 (2). pp. 104-117. ISSN 17509661

Wibowo, Budhi Sholeh and Aditya, Rendy Bayu and Harianto, Tirza Felia (2021) HARNESSING OPEN DATA AND TECHNOLOGY FOR THE STUDY OF ACCESSIBILITY: THE CASE OF INDONESIA’S CAPITAL SITE CANDIDATE. Spatium (46). 46 – 53. ISSN 1450569X

Wibowo, Heri and Surahmanto, Fredy and Ilman, Mochammad Noer (2023) Identifying the Influence of Transient Thermal Tensioning Treatments on Minimizing Distortion and Improving Fatigue Behavior of Steel Welded. Eastern-European Journal of Enterprise Technologies, 4 (12(124). pp. 1-10. ISSN 17294061

Wibowo, Setyawan Bekti and Basuki, Budi and Sutrisno, Sutrisno and Rohmat, Tri Agung and Siswantoro, Soeadgihardo and Nugroho, Febryanto and Ginting, Petricius and Anwar, Zainuri (2021) Vortex Dynamics Study and Flow Visualization on Aircraft Model with Different Canard Configurations. FLUIDS, 6 (4).

Wibowo, Setyawan Bekti and Basuki, Budi and Sutrisno, Sutrisno and Rohmat, Tri Agung and Siswantoro, Soeadgihardo and Nugroho, Febryanto and Ginting, Petricius and Anwar, Zainuri (2021) Vortex dynamics study and flow visualization on aircraft model with different canard configurations. Fluids, 6 (4). ISSN 23115521

Wibowo, Setyawan Bekti and Basuki, Budi and Sutrisno, Sutrisno and Rohmat, Tri Agung and Siswantoro, Soeadgihardo and Nugroho, Febryanto and Ginting, Petricius and Anwar, Zainuri (2021) Vortex dynamics study and flow visualization on aircraft model with different canard configurations. Fluids, 6 (4). ISSN 23115521

Wibowo, Teguh and Widyatama, Arif and Kamal, Samsul and Indarto, Indarto and Deendarlianto, Deendarlianto (2021) The effect of ethylene glycol concentration on the interfacial dynamics of the successive droplets impacting onto a horizontal hot solid surface. International Journal of Thermal Sciences, 159. ISSN 12900729

Wibowo, Teguh and Widyatama, Arif and Kamal, Samsul and Indarto, Indarto and Deendarlianto, Deendarlianto (2021) The effect of ethylene glycol concentration on the interfacial dynamics of the successive droplets impacting onto a horizontal hot solid surface. INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 159. ISSN 1290-0729

Widyanti, Ari and Erlangga, Redifa and Sutarto, Auditya Purwandini and Trapsilawati, Fitri and Ansori, Nachnul and Woodman, Roger and Prawitra, Theresia Amelia and Rifai, Achmad Pratama (2024) Driving forward together: The common intention of Indonesians in different residential areas to use autonomous vehicles. Transportation Research Interdisciplinary Perspectives, 24. ISSN 25901982

Widyatama, Arif and Venter, Mandi and Orejon, Daniel and Sefiane, Khellil (2023) Experimental investigation of bubble dynamics and flow patterns during flow boiling in high aspect ratio microchannels with the effect of flow orientation. International Journal of Thermal Sciences, 189: 108238. pp. 1-22. ISSN 12900729

Wigati, Slamet Setio and Sopha, Bertha Maya and Asih, Anna Maria Sri and Sutanta, Heri (2023) Geographic Information System Based Suitable Temporary Shelter Location for Mount Merapi Eruption. Sustainability (Switzerland), 15 (3): 2073. pp. 1-26. ISSN 20711050

Wijayanta, Setya and Deendarlianto, Deendarlianto and Indarto, Indarto and Prasetyo, Ari and Hudaya, Akhmad Zidni (2023) The effect of the liquid physical properties on the wave frequency and wave velocity of co-current gas-liquid stratified two-phase flow in a horizontal pipe. International Journal of Multiphase Flow, 158 (104300). pp. 1-20. ISSN 03019322

Wijayanto, Titis and Herliansyah, Muhammad Kusumawan and Ayu, Ajeng Sekar and Sudarman, Puspitaningrum Adi (2021) Can edible oils, as practical phase change materials, be used for body cooling after physical work in a hot-humid environment? HUMAN FACTORS AND ERGONOMICS IN MANUFACTURING & SERVICE INDUSTRIES, 31 (6). pp. 613-624. ISSN 1090-8471

Wijayanto, Titis and Herliansyah, Muhammad Kusumawan and Ayu, Ajeng Sekar and Sudarman, Puspitaningrum Adi (2021) Can edible oils, as practical phase change materials, be used for body cooling after physical work in a hot–humid environment? Human Factors and Ergonomics In Manufacturing, 31 (6). 613 – 624. ISSN 10908471

Wijayanto, Titis and Marcillia, Syam Rachma and Lufityanto, Galang and Wisnugraha, Bonifatius Bramantya and Alma, Tasya Ghonia and Abdianto, Rayanda Utomo (2021) The effect of situation awareness on driving performance in young sleep-deprived drivers. IATSS RESEARCH, 45 (2). pp. 218-225. ISSN 0386-1112

Wiranata, Ardi and Ishii, Yasuyuki and Hosoya, Naoki and Maeda, Shingo (2021) Simple and Reliable Fabrication Method for Polydimethylsiloxane Dielectric Elastomer Actuators Using Carbon Nanotube Powder Electrodes. ADVANCED ENGINEERING MATERIALS, 23 (6). ISSN 1438-1656

Wiranata, Ardi and Ohsugi, Yunosuke and Minaminosono, Ayato and Mao, Zebing and Kurata, Haruyuki and Hosoya, Naoki and Maeda, Shingo (2021) A DIY Fabrication Approach of Stretchable Sensors Using Carbon Nano Tube Powder for Wearable Device. FRONTIERS IN ROBOTICS AND AI, 8. ISSN 2296-9144

Witchuda, Thongking and Wiranata, Ardi and Maeda, Shingo and Premachandra, Chinthaka (2023) Reservoir Computing Model for Human Hand Locomotion Signal Classification. IEEE Access, 11. pp. 19591-19601. ISSN 21693536

Witchuda, Thongking and Wiranata, Ardi and Maeda, Shingo and Premachandra, Chinthaka (2023) Reservoir Computing Model for Human Hand Locomotion Signal Classification. IEEE ACCESS, 11. pp. 19591-19601. ISSN 2169-3536

Yakin, R. and Iswanto, P. T. and Maliwemu, E. U. K. (2021) SHOT PEENING EFFECT ON SURFACE PROPERTIES AND PITTING CORROSION RESISTANCE OF BIOMEDICAL STRUCTURAL STEEL AISI 316L. METALURGIJA, 60 (3-4). pp. 249-252. ISSN 0543-5846

Yang, Chao-Lung and Sutrisno, Hendri and Chan, Arnold Samuel and Tampubolon, Hendrik and Wibowo, Budhi Sholeh (2021) Identification and analysis of weather-sensitive roads based on smartphone sensor data: A case study in Jakarta. Sensors, 21 (7). ISSN 14248220

Yu, Vincent F. and Normasari, Nur Mayke Eka and Chen, Wei-Hao (2021) Location-routing problem with time-dependent demands. Computers and Industrial Engineering, 151. ISSN 03608352

Yu, Vincent F. and Normasari, Nur Mayke Eka and Chen, Wei-Hao (2021) Location-routing problem with time-dependent demands. COMPUTERS & INDUSTRIAL ENGINEERING, 151. ISSN 0360-8352

Yuana, Kumara Ari and Andreanto, Prima and Budiana, Eko Prasetya and Deendarlianto, Deendarlianto and Indarto, Indarto (2023) Transient Lattice Boltzmann Numerical Simulation during the Dewetting of Liquid Droplet on a Flat Surface. Computers and Fluids, 255: 105836. pp. 1-20. ISSN 00457930

Yuana, Kumara Ari and Jalaali, Bahrul and Budiana, Eko Prasetya and Pranowo, Pranowo and Widyaparaga, Adhika and Indarto, Indarto and Deendarlianto, Deendarlianto (2021) Lattice Boltzmann simulation of the Rayleigh-Taylor Instability (RTI) during the mixing of the immiscible fluids. EUROPEAN JOURNAL OF MECHANICS B-FLUIDS, 85. pp. 276-288. ISSN 0997-7546

Yudhanto, F. and Jamasri, J. and Rochardjo, H. S. B. and Kusumaatmaja, A. (2021) Experimental Study of Polyvinyl Alcohol Nanocomposite Film Reinforced by Cellulose Nanofibers from Agave Cantala. INTERNATIONAL JOURNAL OF ENGINEERING, 34 (4). pp. 987-998. ISSN 1025-2495

Yudhanto, F. and Jamasri, Jamasri and Rochardjo, H.S.B. and Kusumaatmaja, A. (2021) Experimental study of polyvinyl alcohol nanocomposite film reinforced by cellulose nanofibers from agave cantala. International Journal of Engineering, Transactions A: Basics, 34 (4). 987 – 998. ISSN 17281431

Yudhanto, F. and Yudha, V. and Rochardjo, H.S.B. and Budiyantoro, C. and Khan, A. and Asiri, A.M. and Ridzuan, M.J.M. (2024) Physical, Mechanical, and Thermal Properties of Polyvinyl Alcohol/Nanocrystalline Cellulose Bioplastic Film. International Journal of Engineering, Transactions A: Basics, 37 (1). pp. 94-103. ISSN 17281431

Yuniartha, Deny Ratna and Masruroh, Nur Aini and Herliansyah, Muhammad Kusumawan (2021) An evaluation of a simple model for predicting surgery duration using a set of surgical procedure parameters. Informatics in Medicine Unlocked, 25. ISSN 23529148

Zaki, Norizatie Muhammad and Yunus, Nurul Azhani and Yusoff, Muhamad Shakir and Mazlan, Saiful Amri and Aziz, Siti Aishah Abdul and Izni, Nor Aziyatul and Bahiuddin, Irfan (2021) Effects of petroleum-based oils as dispersing aids on physicochemical characteristics of magnetorheological elastomers. Materials, 14 (22). ISSN 19961944

Conference or Workshop Item

Arvianto, Ary and Sopha, Bertha Maya and Asih, Anna Maria Sri and Imron, Muhammad Ali (2021) Decision-making behavior of traditional retail in distribution system: A conceptual framework. In: International Conference on Industrial Engineering and Operations Management, April 5-8, 2021, Sao Paulo, Brazil.

Bahiuddin, Irfan and Prasetyo, Tegar and Pratama, Dafa Rezy and Imaduddin, Fitrian and Mazlan, Saiful Amri and Surojo, Surojo (2023) An Optimum Tuning of Machine Learning Methods for Predicting Magnetorheological Damper Damping Force for Shock and Vibration Mitigation. In: Proceedings of the 2023 International Conference on Instrumentation, Control, and Automation, ICA 2023, 9 - 11 Agustus 2023, Jakarta.

Bahiuddin, Irfan and Siregar, Parsaulian I and Amri Mazlan, Saiful and Nugroho, Rizki S and Imaduddin, Fitrian and Ismail, Andhi A (2021) A Systematic Approach to Estimate Non-Linear System Parameters using Particle Swarm Optimization and Bond Graph Methods. In: 2021 International Conference on Instrumentation, Control, and Automation (ICA), 25-27 August 2021, Bandung, Indonesia.

Bahiuddin, Irfan and Siregar, Parsaulian I and Amri Mazlan, Saiful and Nugroho, Rizki S and Imaduddin, Fitrian and Ismail, Andhi A (2021) A Systematic Approach to Estimate Non-Linear System Parameters using Particle Swarm Optimization and Bond Graph Methods. In: International Conference on Instrumentation, Control, and Automation (ICA).

Cikarge, Ghia Pisti and Masruroh, Nur Aini and Ridwan, Mohammad Kholid (2021) Selection of Wind Farm Locations using AHP and TOPSIS Methods (Case Study: Cilacap Regency). In: 2021 International Conference on Advanced Mechatronics, Intelligent Manufacture and Industrial Automation (ICAMIMIA), 8-9 December 2021, Surabaya.

Dharmawan, Agus and Evi Masithoh, Rudiati and Zuhrotul Amanah, Hanim (2023) Performance of A Portable NIR Spectrometer to Distinguish Coffee Species Based on Qualitative Chemometric and Artificial Neural Network (ANN) Models. In: BIO Web of Conferences, 10-11 October 2023, Yogyakarta.

Frasetyo, Mohd. Brado and Wijaya, Fransisco Danang and Firmansyah, Eka (2021) Review on virtual synchronous generator model and control for improving microgrid stability. In: 2021 7th International Conference on Electrical Energy Systems (ICEES), 11-13 February 2021, Chennai, India.

Hendry, J. and Sumanto, B. and Prayoga, B.T. and Budiani, R.L. and Lestari, R.A. and Yuda, P.P. and Nugroho, A.A. (2021) Prototype of Wearable Glasses for Body Temperature Monitoring for COVID-19 Mitigation. In: International Conference on Science and Technology, ICoST 2020.

Isharyani, M.E. and Sopha, B.M. and Wibisono, M.A. and Tjahjono, B. (2021) Smart Retail Adaptation Framework for Traditional Retailers: A Systematical Review of Literature. In: 2021 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), 13-16 December 2021, Singapore.

Kok, Y. H. and Kamarulzaman, N. and Shadzalli, Z. F. Mohd and Manaf, N. Abdul and Shah, Ku Nur Afrina Ku Azman and Yusop, Mohd Zamri Mohd and Rohani, Jafri Mohd and Hartono, Budi and Tuyen, Nguyen Duc (2023) Control Analysis of Biomass Gasification with Combined Heat and Power System. In: Proceedings of the 2nd Energy Security and Chemical Engineering Congress, Malaysia.

Luthfiansyah, M.F. and Masruroh, N.A. (2021) Evaluation of Supply Chain Network Resilience Level in Pre-disruption and Post-disruption Scenario. In: 2021 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), 13-16 December 2021, Singapore.

Mahardika, Reza and Musthofa, Muhammad and Nurdin, Rafiq Aly and Wibowo, Setyawan Bekti (2023) Effect of movement speed and flow capacity on the printed chocolate in 3D printing machine. In: INTERNATIONAL CONFERENCE ON INDUSTRIAL, ENTERPRISE, AND SYSTEM ENGINEERING: Collaboration of Science, Technology, and Innovation Toward Sustainable Development, 16 Desember 2021, Bandung.

Megaprastio, Bayu and Zaka, Ahmad Murtadlo and Zahra, Rifda Salsabila and Aisyah, Nyayu and Ariyadi, Hifni Mukhtar (2023) Design of the Organic Rankine Cycle (ORC) System Using R600 and R600a as Working Fluid. In: The 8th International Conference on Energy, Environment, Epidemiology and Information System (ICENIS 2023).

Murti, Prastowo and Takizawa, Akira and Shoji, Eita and Biwa, Tetsushi (2021) Design and construction of multi-cylinder type liquid piston Stirling engine. In: 19th International Stirling Engine Conference (ISEC 2021).

Nugroho, Gesang and Riyadi, Azis Fajar (2021) Design and Repeatability Test of a 6 Degree of Freedom Robotic Arm. In: 2021 International Conference on Advanced Mechatronics, Intelligent Manufacture and Industrial Automation (ICAMIMIA), 8-9 December 2021, Surabaya.

Nugroho, Hanung Adi and Nurfauzi, Rizki (2021) GGB Color Normalization and Faster-RCNN Techniques for Malaria Parasite Detection. In: 2021 IEEE International Biomedical Instrumentation and Technology Conference (IBITeC), 20 - 21 October 2021, Yogyakarta.

Prabhakara, Hafizh Arsa and Nugroho, Rizki S. and Bahiuddin, Irfan and Imaduddin, Fitrian and Nazmi, Nurhazimah and Chazim, Ryandhi R. and Amri Mazlan, Saiful (2023) Modeling of A Magnetorheological Valve Design Based on Artificial Neural Networks for Heavy Equipment Cabin Application. In: 2023 IEEE 9th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA), 17 - 18 October 2023, Kuala Lumpur, Malaysia.

Pradecta, Muhammad Reza and Winarbawa, Heryoga and Suhanan, Suhanan and Prayitno, Yosephus Ardean Kurnianto (2021) Performance Study of Nanofluids TiO2/TermoXT 32 inside Double-Concentric Pipes Heat Exchanger using Twisted Tape Insertions. In: The 2nd International Conference on Energy Sciences (ICES) 2018, 24-26 September 2018, Bandung.

Prayitno, Yosephus Ardean Kurnianto and Zhao, Tong and Iso, Yoshiyuki and Takei, Masahiro (2021) A simulation and experimental study on particle volume fraction of PMMA suspension in centrifugal fields. In: 11th International Conference on Thermofluids 2020, 10-11 November 2020, Yogyakarta.

Putri, D.P. and Arini, H.M. and Normasari, N.M.E. (2021) A Simulation-based Analysis of the Blood Supply Chain during Covid-19. In: 2021 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), 13-16 December 2021, Singapore.

Rahman, Karindra Aulia and Sopha, Bertha Maya (2021) Determinants of When-to-evacuate Decisions: An Empirical Investigation. In: 2021 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), 13-16 December 2021, Singapore.

Rosmindari, Shiammita and Saputro, Arifin Dwi and Bintoro, Nursigit (2023) Changes of Dark Couverture Chocolate Hardness During Storage Tempered Using Automatic Tempering Machine with Tank and Tempering Temperature as Variables. In: BIO Web of Conferences, 10 October 2023 - 11 October 2023, Yogyakarta.

Santoso, Agus and Wijaya, F. Danang and Setiawan, Noor Akhmad and Waluyo, Joko (2021) Comparison of data mining algorithms for pressure prediction of crude oil pipeline to identify congeal. In: E3S Web of Conferences.

Santoso, Agus and Wijaya, F. Danang and Setiawan, Noor Akhmad and Waluyo, Joko (2021) Comparison of data mining algorithms for pressure prediction of crude oil pipeline to identify congeal. In: ICST 2021.

Saputri, A.D. and Arini, H.M. (2021) Literature Review of Risk Communication on Public Perceptions in Responding to Covid-19 with a System Dynamic Approach. In: 2021 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), 13-16 December 2021, Singapore.

Sari, D.P. and Masruroh, N.A. and Asih, A.M.S. (2021) Factors Affecting Consumer Acquisition of Secondhand Smartphone in Indonesia. In: 2021 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), 13-16 December 2021, Singapore.

Sari, Wangi P. and Agbroko, Samuel O. and Covington, James A. (2021) Semiconducting Indium Oxide Sensor for Oxygen Detection. In: 2021 IEEE Region 10 Symposium (TENSYMP), 23-25 August, 2021, Jeju, Korea.

Sugiyanto, Sugiyanto and Kamal, Samsul and Waluyo, Joko and Widyaparaga, Adhika (2021) The Experiment Study on the Utilization of Standing Wave Thermoacoustic Engine to Drive Wells Bi-Directional Turbine. In: 2nd International Conference on Energy Sciences 2018, ICES 2018, 24 September 2018through 26 September 2018, Bandung.

Syafputra, Muhamad Apriyudi and Waluyo, Joko and Imawan, Roni (2023) Optimization of Configuration Hybrid Power Generation System at Oil Refinery. In: Proceedings of 2023 4th International Conference on High Voltage Engineering and Power Systems, ICHVEPS 2023, 6 Agustus 2023 - 10 Agustus 2023, Bali Indonesia.

Widhiyanuriyawan, Denny and Hamidi, Nurcholish and Darjito, Darjito and Hatib, Rustan and Widhiyanurrochmansyah, Reynolds (2023) Fabrication of Perovskite Solar Cell (PSC) Using NiO/GO Material. In: 2023 3rd International Conference on Electronic and Electrical Engineering and Intelligent System (ICE3IS), 9-10 Agustus 2023, Yogyakarta, Indonesia.

Widyatama, Arif and Orejon, Daniel and Sefiane, Khellil (2023) Thermal Characteristics of Flow Boiling of HFE-7000 in High Aspect Ratio Microchannels with The Effect of Flow Orientation. In: International Heat Transfer Conference 17, 14-18 Agustus 2023, Cape Town, South Africa.

This list was generated on Thu Nov 7 01:00:17 2024 WIB.